Stiga.com uses cookies to improve your experience on this website. By continuing to browse this website you are agreeing to our use of cookies. Find out more by reading our Cookie Policy

ROBOT LAWN MOWERS AUTOCLIP 524 S (7.5Ah)

ROBOT LAWN MOWERS AUTOCLIP 524 S (7.5Ah)

Overview

Managing gardens up to 2800 m2 in up to 4 separate cutting areas. The Stiga Autoclip 524 S mows for 3 hours and 30 minutes per cutting cycle and charges autonomously. Combined with the daily lawn mowing, the superior stainless steel 29 cm blade assures a truly perfect lawn result. Provided with a 7.5 Ah superior Lithium battery and brushless motors meaning longer life-span, lower noise levels and limited energy consumption.  Innovative devices increases at the top the operational efficiency and reliability of this highly-specified, robust robot mower. The Bluetooth enables connection and updates without any cable. The charging station is protected from sun and rain by the provided cover. The SMS alert module can be purchased separately. 

The addition of a second 7.5 Ah battery increases the autonomy of Autoclip 524 S up to 6 hours per working cycle and let it manage up to 3500 m2.

Back to recharge

Autoclip does not need the installation of an additional guide wire as common robots. When needing recharge, Autoclip detects the shortest way on the perimeter wire to the charging station. To avoid tracing the border by driving always on the wire, it can be programmed to proceed at a fixed distance alongside of it and match the wire betimes.

Base protection cover

To protect your Autoclip from all athmosferic agents, like sun and rain, when staying hooked in the charging station for charge or pause between mowing cycles.

Blade safe stoppage

Bluetooth receiver

To quickly transfer software updates from your device Autoclip without connecting it via cables. It also allows you drive the robot by remote control.

Brushless motor

Brushless motors, thanks to electromagnets instead of mechanical brushes, provide higher efficiency reducing energy losses. Brushless motors assure a lower battery consumption and reduced noise, plus a significantly longer run time between maintenance intervals.

Efficient cut

The combination of the Autoclip working speed and its wide blade diameter assures a pefect management of sqm cut per hour increasing the cutting efficiency, optimizing cutting cycles and restricting the energy consumption.

Gyroscope

Intelligent spiral movement

Recognizing tall and thick grass, Autoclip triggers the intelligent spiral movement for a perfect finish and clearing of the area.

Li-ion technology

New state-of-the-art technology based on high performing lithium batteries. The most modern solution to reach improved performance combined with longer working time

Manage up to 4 areas

Allows 4 different areas to be cut. Autoclip reaches the area through narrow passages, along driveways, crossing yards according to the wire installation and it self-programmes the work according to the percentage assigned to each area by the Autoclip menu.

Modular blade speed

The blade speed modularity assures a perfect and homogeneus finish of the lawn cut by always keeping stable the rpm even when cutting in hard conditions - low battery recharge or on steep slopes for example.

Mowed lawn detection sensor

Thanks to sensors, the robot detects when the lawn is cut and need no maintenance; Autoclip goes back to the station waiting for the next working cycle and so optimizing the energy consumption.

Obstacle detection system on cover

When Autoclip bumps into a tree or bush, the strain is perceived through the sliding of the robot cover by sensors, the impulse is transferred to the motherboard which gives input to the robot to back up, turn and continue its work on different direction.

Rain sensor

As cutting in dry weather produces the best result, the adjustable rain sensor alerts Autoclip to return to the charging station and stay there as long as it rains. It can optionally be paused, disabled or fine tuned to better match your local weather conditions.

Robustness

The robustness and the high quality of each Autoclip component - from motors to the border wire - is perfectly combined with the intelligent management of power and autonomy, to make Autoclip suitable for the hardest cutting cycles in the biggest gardens.

Stainless steel blade

The best cutting performance. No comparison to standard robot cutters: the Autoclip blade is made of stainless, robust steel requiring minimum maintenance.

POWER
Maximum working area 2800 m²
Motor type Brushless
Net weight 16,1 kg
Battery voltage 25,9 V
Battery type Lithium-ions
Number of batteries 1
Battery capacity 7,5 Ah
Charging time 3h
Charging system Automatic
Battery charger type 5,0 A
CUTTING SYSTEM
Blade type 4 teeth / 8 edges
Number of blades 1
Cutting width 29 cm
Cutting height range 20-45 mm
Blade speed Modular, 3000 rpm
Cutting method Random
Cutting speed 30 m/min
Intelligent cutting movement Spiral & border cut
Eco-Mode Yes
Back to recharge On wire / V-meter
Rain sensors Yes
Maximum suggested slopes 35 %
Maximum managed slopes 45 %
Maximum slope near the border 20 %
Maximum managed areas 4
Wheel size 224 mm
NAVIGATION AND DEVICES
Bluetooth receiver Yes
Encoder Yes
Inclinometer Yes
Gyroscope Yes
Cube board (compass) No
STANDARD EQUIPMENT AND INSTALLATION
Cable lenght 150 m
Fixing nails 200 pcs
Recharging base Yes
Base protection cover Yes
SAFETY
Obstacle detection sensors On cover
Lift sensors On support wheels
Tilt sensor Yes
Emergency Stop Yes
PIN code Yes
Noise level guaranteed 65-70 dB(A)
OVERALL DIMENSIONS
Weight with battery/ies 16,1 kg
Machine dimensions (LxWxH) 630 X 502 X 290 mm
Gross weight 33,8 kg
Packaging dimensions (LxWxH) 890 X 700 X 440 mm
Working time (+/- 20%) 210 min
Article number 2R5005058/S15
EAN code 8008984632264
No data available
No data available

You might be also interested in...

Accessories