open_in_full

ST 1151 E

Electric snow thrower
Single-stage snow blower with 1800 W electric motor and 51 cm clearing width.
  • 1.8 kW electric motor
  • Single-stage snow-throwing system
  • 51 cm clearing width
  • Snow-throwing distance up to 6 metres
  • Chute with 180° swivel and 90° tilt
Tax Included

Product details and specs

ST 1151 E detail 6
ST 1151 E detail 7
ST 1151 E detail 8
The STIGA ST 1151 E snow blower is compact and lightweight and is designed to clear snow from pathways and other flat surfaces. This single-stage snow blower with an 1800 W electric motor makes clearing residential areas effortless. The ST 1151 E has a chute which can swivel through 180° and deflector which can be tilted 90°, providing maximum control over the flow of snow. It can be aimed left or right using the practical central crank handle. The shape of the auger makes it possible to clear snow up to 25 cm deep. The handlebar has a soft grip and can be collapsed to save space when storing, while the practical handle behind the chute makes it easy to lift and move the snow blower when you have finished using it.

Features

Adjustable expulsion chute
The chute can be swivelled through 180° using the crank handle, while the deflector can be manually adjusted up to 90° for maximum control over the flow of snow.
Plastic auger
The auger measures 51 cm in width and 17.5 cm in diameter, and can throw snow up to 6 metres.
Ergonomic controls
The start buttons which operate the blower and the auger are conveniently located on the handlebar, along with the traction lever.
Carrying handle
The practical handle located behind the chute makes lifting and moving the snow blower easy.

Awards and Certifications

Technical specs

General info
EAN/UPC
8008984502420
SKU
18-2860-33
Power
Power
1.8 kW
Power source
Electric
Working system
Platform
One stage
Auger width
51 cm
Auger house height
30 cm
Auger diameter
17.5 cm
Auger type
Plastic
Chute rotation
180 °
Chute control
Manual - Center crank
Chute material
Plastic
Deflector control
Manual - On chute
Deflector material
Plastic
One hand grip
Yes
Throwing performance
6 m
Transmission
Transmission type
Manual
Number of stages
1
Equipment
Steering type
Manual
Wheel type
Plastic, Stiga design
Transport handle
Yes
Plug type
Schuko (Type F)
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
101
Vibration level hand (m/s2)
2.5
Measured sound power level dB(A)
97
Measured sound pressure level at operator ear dB(A)
86
Overall dimensions
Pack weight
20.9 kg
Product length
1140 mm
Product width
530 mm
Product height
950 mm
Product weight
16.34 kg

Support

How far does it blow the snow?
On average, the snow is blown a distance of 6 metres. This varies depending on the density and type of snow.
Does it have gears or does it have to be pushed?
The machine does not have gears but is easy to push. If you are looking for a snow blower with built-in traction, you would need a two-stage snow blower.
Why has my snow blower stopped throwing out snow as well as it used to?
One reason why it might not be working as efficiently could be due to the formation of ice inside the snow blower. Snow can freeze and form sheets of ice which prevent snow from being discharged from the machine. It is good practice to always clean the snow blower before use. We recommend reading the user manual or visiting your nearest service centre if the problem persists.
What material are the blades made from?
This snow blower has blades made from plastic.
Does the surface below the snow have to be smooth?
It does not. The smoother the surface is, the better the results in terms of snow clearing.
Can it be transported by car?
Single-stage snow blowers can be easily transported by car. This snow blower comes equipped with a folding handle and a carrying handle. It is compact and weighs less than 20 kg. The question of whether or not it can be transported depends on the capacity of your car. We recommend checking the dimensions listed in the technical specifications.

Manuals