What instructions should I follow to adjust the blowing power?
You should always adjust the intensity of the air flow according to the type of material to be removed:
- low speed for light materials and small twigs on the grass.
- medium speed for moving grass and light leaves on asphalt or solid ground.
- maximum speed for heavier materials such as fresh snow, wet leaves or large pieces of dirt.
You are always recommended to pay careful attention to prevent the material removed or dust from injuring people or animals and damaging
property. Always check the wind direction and never work against the wind.
For more details, please see the user manual.
Is it also possible to use the machine as a vacuum? If yes, what material can be collected?
Yes, this machine has a vacuum + mulcher function and has a collection bag for the vacuumed material.
The vacuumed material is also mulched before being conveyed into the collection bag. This makes it ideal for collecting leaves, grass and small twigs with a diameter less than 4 mm.
It is recommended not to collect wet grass or leaves to avoid obstructing the internal pipes and the mulching rotor.
What should I do if other objects get vacuumed up unintentionally
If this type of situation occurs, you are recommended to:
- shut the machine down immediately
- remove the vacuum tube
- remove the foreign body via the
Lastly, ensure that the mulching rotor and the pipes are completely free before using the machine again.
Can I fill the collection bag completely?
It is recommended not to fill the collection bag right up to the top but to empty it beforehand. This results in greater operating comfort, given the reduced weight of the bag, and the machine operating efficiently.