SBC 500 AE

Brushcutter powered by a next-generation 48 V battery with a single handle and straight shaft, 38 cm cutting width, Tap&Go head and metal blade. Battery not included.
  • check Powered by a next-generation 48 V battery
  • check Single loop handle
  • check Straight shaft
  • check 38 cm cutting width
  • check Tap&Go dual-line trimmer head and 4T blade included
  • check 4.0 Ah battery recommended (not included)
The STIGA SBC 500 AE brushcutter is powered by a 48 V battery and a powerful brushless next-generation motor. With an adjustable single (loop) handle and split shaft, it is perfect to maximise storage space or for easy transport. The SBC 500 AE brushcutter was designed for maximum efficiency with all the advantages of battery power: lightweight, zero emissions, quiet and low maintenance. The intuitive keypad makes operation easy. The Tap&Go head, which releases the line by simply tapping the head on the ground, and the 4T metal disc are supplied as standard. The recommended 4.0 Ah battery can be purchased separately.
More Information
Short Description Brushcutter powered by a next-generation 48 V battery with a single handle and straight shaft, 38 cm cutting width, Tap&Go head and metal blade. Battery not included.
EAN/UPC 8008984811805
Unique selling point 06 4.0 Ah battery recommended (not included)
Unique selling point 02 Single loop handle
Unique selling point 03 Straight shaft
Unique selling point 05 Tap&Go dual-line trimmer head and 4T blade included
Unique selling point 04 38 cm cutting width
Unique selling point 01 Powered by a next-generation 48 V battery
Key features 1 title Keypad
Key features 1 description The handy keypad with ergonomic switches is located on the handle in order to guarantee control and safety.
Key features 1 image /a/s/asset9b6244b48bc00cda1f92c03980a96dcaf20c9922_SBC500AE_278200008ST1_detail02.jpg
Key features 2 title Tap & Go head
Key features 2 description This particular head enables the automatic release of the line with a simple tap on the ground.
Key features 2 image /a/s/assetfda7234d277cb8c7a1231c584f7bf41f8c151050_SBC500AE_278200008ST1_detail03.jpg
Key features 3 title No
Key features 3 description No
Key features 3 image N/A
Key features 4 title No
Key features 4 description No
Key features 4 image N/A
Key features 5 title No
Key features 5 description No
Key features 5 image N/A
Key features 6 title No
Key features 6 description No
Key features 6 image N/A
Award 2 logo no_selection
Award 1 logo no_selection
Award 3 logo no_selection
Certification CE logo no_selection
Certification EAC logo no_selection
Certification GS logo N/A
FAQ 1 answer Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
FAQ 1 question What kind of protective gear should I use?
FAQ 2 question What kind of maintenance should I carry out?
FAQ 2 answer To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
FAQ 3 question Which type of grass and shrubs can you work on?
FAQ 3 answer This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
FAQ 4 question How do you adjust the length of the line?
FAQ 4 answer This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
FAQ 5 question The line no longer feeds out from the head. What might have happened?
FAQ 5 answer The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
FAQ 6 question No
FAQ 6 answer No
Power source Lithium-ion battery
Motor type Brushless
Electric motor power 500 W
Maximum motor speed 6000 rpm
Voltage 48 V
Battery capacity 4 Ah
Li-ion battery nominal energy N/A
Suggested battery capacity 4 Ah
Working time (+/- 20%) 30 min
Nylon line diameter (millimeter) 2
Cutting width 38 cm
Cutting angle Fixed
Nylon head type Tap & Go dual line easy load
Nylon line length 4 m
Blade type 4 T
Blade diameter 255 mm
Handle type Loop
Vibe Control System (VCS) No
Shaft type Straight
Shaft tube diameter 25.4 mm
Inner shaft diameter N/A
Soft grip handle Yes
Harness Single
Battery charger Not included
Battery charger included No
Battery charger output current N/A
Battery charger plug type N/A
Included tools kit N/A
Battery included N/A
Vibration level (left/right handle) N/A
Measured sound pressure level at operator ear dB(A) N/A
Guaranteed sound power level (LwA) - dB(A) N/A
Measured sound power level dB(A) N/A
Packaged weight 5.2 kg
Product weight without battery N/A
Product weight without cutting system N/A
Product length 1870 mm
Product width 430 mm
Product height 320 mm
Product weight 4.0000
What's in the box Metal blade
Quick Guide No
Product video - Title STIGA 500 Series System
Product video - URL https://youtu.be/sZsKQXroFys
How to video 1 - Title STIGA 500 Series System - Battery powered tools
How to video 1 - URL https://youtu.be/F7hD0p9nu_g
How to video 2 - Title No
How to video 2 - URL No
How to video 3 - Title No
How to video 3 - URL No
How to video 4 - Title No
How to video 4 - URL No
How to video 5 - Title No
How to video 5 - URL No
How to video 6 - Title No
How to video 6 - URL No
How to video 7 - Title No
How to video 7 - URL No
How to video 8 - Title No
How to video 8 - URL No
How to video 9 - Title No
How to video 9 - URL No
How to video 10 - Title No
How to video 10 - URL No
SKU 278200008/ST1
Secondary Cta Url N/A
Product Cta Url N/A
Product Cta Label N/A
Write Your Own Review
You're reviewing:SBC 500 AE

Key features

Product details and specs

The STIGA SBC 500 AE brushcutter is powered by a 48 V battery and a powerful brushless next-generation motor. With an adjustable single (loop) handle and split shaft, it is perfect to maximise storage space or for easy transport. The SBC 500 AE brushcutter was designed for maximum efficiency with all the advantages of battery power: lightweight, zero emissions, quiet and low maintenance. The intuitive keypad makes operation easy. The Tap&Go head, which releases the line by simply tapping the head on the ground, and the 4T metal disc are supplied as standard. The recommended 4.0 Ah battery can be purchased separately.

Keypad

The handy keypad with ergonomic switches is located on the handle in order to guarantee control and safety.

Tap & Go head

This particular head enables the automatic release of the line with a simple tap on the ground.

Technical specs

General info
EAN/UPC8008984811805
SKU278200008/ST1
Cutting system
Nylon line diameter (millimeter)2
Cutting width38 cm
Cutting angleFixed
Nylon head typeTap & Go dual line easy load
Nylon line length4 m
Blade type4 T
Blade diameter255 mm
Tools kit
Battery chargerNot included
Power
Power sourceLithium-ion battery
Motor typeBrushless
Electric motor power500 W
Maximum motor speed6000 rpm
Voltage48 V
Battery capacity4 Ah
Suggested battery capacity4 Ah
Working time (+/- 20%)30 min
Equipment
Handle typeLoop
Shaft typeStraight
Shaft tube diameter25.4 mm
Soft grip handleYes
HarnessSingle
Overall dimensions
Packaged weight5.2 kg
Product length1870 mm
Product width430 mm
Product height320 mm
Product weight4 kg

What's in the box

What's in the box

  • Metal blade

Support

Support

  • What kind of protective gear should I use?

    Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.

    Which type of grass and shrubs can you work on?

    This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.

    The line no longer feeds out from the head. What might have happened?

    The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside. These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions. Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.

    What kind of maintenance should I carry out?

    To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up. Remember that it is important to consult the user and maintenance manual for details of each of these tasks.

    How do you adjust the length of the line?

    This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard. For further information, see the instruction manual.

Compatible Products

Related Accessories

  1. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 8.
  2. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 9.
  3. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 10.
  4. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 11.
  5. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 12.
  6. SBT 540 AE
    SBT 540 AE
    4 Ah battery suitable for 500 Series products.
  7. SCG 515 AE
    SCG 515 AE
    Next-generation battery charger for STIGA's 500 Series batteries.
  8. SBT 520 AE
    SBT 520 AE
    2 Ah battery suitable for 500 Series products.
  9. SFC 530 AE
    SFC 530 AE
    Charger for quickly charging 48 V batteries.
  10. TIGER LINE 15M Ø2.4MM ROUND
    TIGER LINE 15M Ø2.4MM ROUND
    15-metre reel of "tiger"-type round section co-extruded line with a 2.4 mm diameter.
  11. TIGER LINE 15M Ø2.7MM ROUND
    TIGER LINE 15M Ø2.7MM ROUND
    15-metre reel of "tiger"-type round section co-extruded line with a 2.7 mm diameter.
  12. TIGER LINE 15M Ø3.0MM ROUND
    TIGER LINE 15M Ø3.0MM ROUND
    15-metre reel of "tiger"-type round section co-extruded line with a 3.0 mm diameter.
  13. TIGER LINE 87M Ø2.4MM ROUND
    TIGER LINE 87M Ø2.4MM ROUND
    87-metre dispenser of "tiger"-type round section co-extruded line with a 2.4 mm diameter.
  14. TIGER LINE 72M Ø2.7MM ROUND
    TIGER LINE 72M Ø2.7MM ROUND
    72-metre dispenser of "tiger"-type round section co-extruded line with a 2.7 mm diameter.
  15. TIGER LINE 56M Ø3.0MM ROUND
    TIGER LINE 56M Ø3.0MM ROUND
    56-metre dispenser of "tiger"-type round section co-extruded line with a 3.0 mm diameter.
  16. TIGER LINE 437M Ø2.4MM ROUND
    TIGER LINE 437M Ø2.4MM ROUND
    437-metre roll of "tiger"-type round section co-extruded line with a 2.4 mm diameter.
  17. SP66 LINE 15M Ø1.6MM ONDULATED
    SP66 LINE 15M Ø1.6MM ONDULATED
    15-metre reel of undulating section line with a 1.6 mm diameter.
  18. SP66 LINE 15M Ø2.0MM ONDULATED
    SP66 LINE 15M Ø2.0MM ONDULATED
    15-metre reel of undulating section line with a 2.0 mm diameter.
  19. SP66 LINE 15M Ø2.4MM ONDULATED
    SP66 LINE 15M Ø2.4MM ONDULATED
    15-metre reel of undulating section line with a 2.4 mm diameter.
  20. SP66 LINE 15M Ø2.7MM ONDULATED
    SP66 LINE 15M Ø2.7MM ONDULATED
    15-metre reel of corrugated section line with a 2.7 mm diameter.
  21. SP66 LINE 15M Ø3.0MM ONDULATED
    SP66 LINE 15M Ø3.0MM ONDULATED
    15-metre reel of undulating section line with a 3.0 mm diameter.
  22. SP66 LINE 196M Ø1.6MM ONDULATE
    SP66 LINE 196M Ø1.6MM ONDULATE
    196-metre bobbin of undulating section line with a 1.6 mm diameter.
  23. SP66 LINE 126M Ø2.0MM ONDULATE
    SP66 LINE 126M Ø2.0MM ONDULATE
    126-metre bobbin of undulating section line with a 2.0 mm diameter.
  24. SP66 LINE 87M Ø2.4MM ONDULATED
    SP66 LINE 87M Ø2.4MM ONDULATED
    87-metre dispenser of undulating section line with a 2.4 mm diameter.
  25. SP66 LINE 72M Ø2.7MM ONDULATED
    SP66 LINE 72M Ø2.7MM ONDULATED
    72-metre dispenser of undulating section line with a 2.7 mm diameter.
  26. SP66 LINE 56M Ø3.0MM ONDULATED
    SP66 LINE 56M Ø3.0MM ONDULATED
    56-metre dispenser of undulating section line with a 3.0 mm diameter.
  27. SCG 515 AE
    SCG 515 AE
    Next-generation battery charger for STIGA's 500 Series batteries.
  28. SFC 530 AE
    SFC 530 AE
    Next-generation battery charger for quick charging of STIGA's 500 Series batteries.
  29. SBT 550 AE
    SBT 550 AE
    5 Ah battery suitable for 500 Series products.
  30. TIGER LINE 279M Ø3.0MM ROUND
    TIGER LINE 279M Ø3.0MM ROUND
    279-metre roll of "tiger"-type round section co-extruded line with a 3.0 mm diameter.
  31. TRIMMER HEAD EASY LOAD Ø102mm
    TRIMMER HEAD EASY LOAD Ø102mm
    Easy Work head for brushcutters, double line, 102 mm in diameter.
  32. TIGER LINE 41M Ø3.5MM ROUND
    TIGER LINE 41M Ø3.5MM ROUND
    41-metre dispenser of "tiger"-type round section co-extruded line with a 3.5 mm diameter.
  33. TIGER LINE 32M Ø4.0MM ROUND
    TIGER LINE 32M Ø4.0MM ROUND
    32-metre dispenser of "tiger"-type round section co-extruded line with a 4.0 mm diameter.
  34. TIGER LINE 9M Ø3.5MM ROUND
    TIGER LINE 9M Ø3.5MM ROUND
    9-metre reel of "tiger"-type round section co-extruded line with a 3.5 mm diameter.
  35. TIGER LINE 7M Ø4.0MM ROUND
    TIGER LINE 7M Ø4.0MM ROUND
    7-metre reel of "tiger"-type round section co-extruded line with a 4.0 mm diameter.
  36. TIGER LINE 205M Ø3.5MM ROUND
    TIGER LINE 205M Ø3.5MM ROUND
    205-metre roll of "tiger"-type round section co-extruded line with a 3.5 mm diameter.
  37. TIGER LINE 156M Ø4.0MM ROUND
    TIGER LINE 156M Ø4.0MM ROUND
    156-metre roll of "tiger"-type round section co-extruded line with a 4.0 mm diameter.
  38. SP SQUARE LINE 15 M Ø 2,4 MM
    SP SQUARE LINE 15 M Ø 2,4 MM
    15-metre reel of square section line with a 2.4 mm diameter.
  39. SP SQUARE LINE 15 M Ø 2,7 MM
    SP SQUARE LINE 15 M Ø 2,7 MM
    15-metre reel of square section line with a 2.7 mm diameter.
  40. SP SQUARE LINE 15 m Ø 3,0 mm
    SP SQUARE LINE 15 m Ø 3,0 mm
    15-metre reel of square section line with a 3.0 mm diameter.
  41. SP SQUARE LINE 69 M Ø 2,4 MM
    SP SQUARE LINE 69 M Ø 2,4 MM
    69-metre dispenser of square section line with a 2.4 mm diameter.
  42. SP SQUARE LINE 55 M Ø 2,7 MM
    SP SQUARE LINE 55 M Ø 2,7 MM
    55-metre dispenser of square section line with a 2.7 mm diameter.
  43. SP SQUARE LINE 44 M Ø 3,0 MM
    SP SQUARE LINE 44 M Ø 3,0 MM
    44-metre dispenser of square section line with a 3.0 mm diameter.
  44. SP SQUARE LINE 32 M Ø 3,5 MM
    SP SQUARE LINE 32 M Ø 3,5 MM
    32-metre dispenser of square section line with a 3.5 mm diameter.
  45. SP SQUARE LINE 25M Ø 4,0 MM
    SP SQUARE LINE 25M Ø 4,0 MM
    25-metre dispenser of square section line with a 4.0 mm diameter.
  46. SP SQUARE LINE 345 M Ø 2,4 MM
    SP SQUARE LINE 345 M Ø 2,4 MM
    345-metre roll of square section line with a 2.4 mm diameter.
  47. SP SQUARE LINE 275 M Ø 2,7 MM
    SP SQUARE LINE 275 M Ø 2,7 MM
    275-metre roll of square section line with a 2.7 mm diameter.
  48. SP SQUARE LINE 220 M Ø 3,0 MM
    SP SQUARE LINE 220 M Ø 3,0 MM
    220-metre roll of square section line with a 3.0 mm diameter.
  49. SP SQUARE LINE 160 M Ø3,5 MM
    SP SQUARE LINE 160 M Ø3,5 MM
    160-metre roll of square section line with a 3.5 mm diameter.
  50. SP SQUARE LINE 125 M Ø 4,0 MM
    SP SQUARE LINE 125 M Ø 4,0 MM
    125-metre roll of square section line with a 4.0 mm diameter.
  51. SP SQUARE LINE 16 M Ø 3,5 MM
    SP SQUARE LINE 16 M Ø 3,5 MM
    SP Square line 16 for brushtrimmers
  52. SP SQUARE LINE 12 M Ø 4,0 MM
    SP SQUARE LINE 12 M Ø 4,0 MM
    SP Square line 12 for brushtrimmers