BC 450 HD
Petrol lawn trimmer - brushcutter
Brushcutter powered by a 50 cc petrol engine with straight shaft, double "bike-style" handle and 45 cm cutting width.
- 50 cc petrol engine
- Double "bike-style" handle
- Straight shaft
- 45 cm cutting width
- Bump & Work dual line head and 3T blade included
- Double harness included
Product details and specs
The BC 450 HD brushcutter is powered by a 50 cc4-stroke petrol engine which is quiet and easy to start. The 4-stroke engine ensures lower emissions, low vibration and high performance, along with fuel management and simple maintenance. The BC 450 HD has a 45 cm cutting width and Bump&Work dual line head which quickly releases the line by simply tapping the head on the ground. This brushcutter is optimally well-balanced and has an excellent weight-power ratio. It has a double "bike-style" handle and can be used with the supplied single harness for greater user comfort. The 3T three-tooth blade supplied is ideal for cutting challenging brushwood.
What's in the box
BC 450 HD
Petrol lawn trimmer - brushcutter- lensNylon head
- lensMetal blade
- lensHarness
- lensPlastic bottle
- lensScrewdriver
- lensSocket spanner
Technical specs
General info
EAN/UPC
8008984840546
SKU
281521003/21
Power
Power
1.47 kW
Power source
Petrol 4-stroke
Displacement
47.9 cm³
Starter
Recoil
Primer
Yes
Choke
Manual
Fuel tank capacity
0.63 l
Carburettor type
Rotary valve
Ignition coil type
Digital
Air filter type
Sponge
Cutting system
Nylon line diameter (millimeter)
2,8
Cutting width
45 cm
Nylon head type
Bump & Work dual line - Easy load
Nylon line length
4 m
Blade type
3 T
Blade diameter
255 mm
Equipment
Handle type
Bike
Vibe Control System (VCS)
No
Shaft type
Straight
Shaft tube diameter
28 mm
Inner shaft diameter
25 mm
Soft grip handle
Yes
Harness
Double
Tools kit
Included tools kit
Bar key, screwdriver
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
115
Measured sound power level dB(A)
112.3
Measured sound pressure level at operator ear dB(A)
96.1
Vibration level left handle (m/s2)
5.1
Vibration level right handle (m/s2)
5.2
Overall dimensions
Pack weight
14.4 kg
Product weight without cutting system
8.2 kg
Product length
1880 mm
Product width
684 mm
Product height
430 mm
Product weight
8.7 kg
Related Accessories
Support
What kind of protective gear should I use?
Using this brushcutter petrol requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This petrol brush cutter is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.