GT 330 A
Petrol lawn trimmer - brushcutter
Grass trimmer powered by a 25.4 cc 2-stroke petrol engine with curved shaft, single handle, 38 cm cutting width and Tap&Go dual line head.
- 25.4 cc 2-stroke petrol engine
- Single loop handle
- Curved shaft
- 38 cm cutting width
- Tap&Go Dual Line strimmer head
Product details and specs
The STIGA GT 330 A grass trimmer has a 25.4 cc petrol engine with curved shaft for perfecting borders even with obstacles and obstructions. The shaft is jointed to save storage space when not in use and for easier transportation. The GT 330 A has a single loop handle and innovative Tap&Go dual line head which quickly releases the line by simply tapping it on the ground. This grass strimmer has a 38 cm cutting width.
Developed for all gardening newbies or those gardeners who want to act quick and achieve a certain garden quality.
- Lightweight tools
- Easy to start, adjust, use, clean and store
- Simple and intuitive functions
What's in the box
GT 330 A
Petrol lawn trimmer - brushcutter- lensNylon head Plastic bottle Screwdriver Socket spanner
Technical specs
General info
EAN/UPC
8008984853379
SKU
287110102/ST2
Level
Essential
Series
Series 3
Power
Power
0.7 kW
Power source
Petrol 2-stroke
Displacement
25.4 cm³
Starter
Easy start recoil
Primer
Yes
Choke
Manual
Fuel tank capacity
0.65 l
Carburettor type
Rotary valve
Ignition coil type
Analogic
Air filter type
Sponge
Cutting system
Nylon line diameter (millimeter)
2
Cutting width
38 cm
Nylon head type
Tap & Go dual line
Nylon line length
4 m
Equipment
Handle type
Loop
Vibe Control System (VCS)
Yes
Shaft type
Curved Split
Shaft tube diameter
26 mm
Inner shaft diameter
8 mm
Soft grip handle
Yes
Harness
No
Tools kit
Included tools kit
Spark plug key, screwdriver
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
109
Measured sound power level dB(A)
106.31
Measured sound pressure level at operator ear dB(A)
88.9
Vibration level front handle (m/s2)
3.5
Vibration level rear handle (m/s2)
5.8
Overall dimensions
Pack weight
8.7 kg
Product weight without cutting system
5.7 kg
Product length
1610 mm
Product width
335 mm
Product height
365 mm
Product weight
6.5 kg
Related Accessories
Support
What kind of protective gear should I use?
Using this brushcutter petrol requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the brush cutter is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) - parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This petrol brush cutter can work on domestic lawns, small outside areas, but it is especially useful for trimming the edges, including more marginal ones, which often cannot be reached with other types of applications. It is recommended not to allow the grass to grow too high in order to avoid forcing the machine to work too intensely, which would mean excessively slow operation. As it only has a trimmer head, it cannot be used on shrubs.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.