SBC 500 AE

£149.00
SKU
278200008/ST1
Vat Included
Brushcutter powered by a next-generation 48 V battery with a single handle and straight shaft, 38 cm cutting width, Tap&Go head and metal blade. Battery not included.
  • check Powered by a next-generation 48 V battery
  • check Single loop handle
  • check Straight shaft
  • check 38 cm cutting width
  • check Tap&Go dual-line trimmer head and 4T blade included
  • check 4.0 Ah battery recommended (not included)

This product is not currently available for direct delivery please check with your local dealer for more info.

favorite Save for later
  • Free Shipping
The STIGA SBC 500 AE brushcutter is powered by a 48 V battery and a powerful brushless next-generation motor. The SBC 500 AE brushcutter was designed for maximum efficiency with all the advantages of battery power: lightweight, zero emissions, quiet and low maintenance. The intuitive keypad makes operation easy. The Tap&Go head, which releases the line by simply tapping the head on the ground, and the 4T metal disc are supplied as standard. The recommended 4.0 Ah battery can be purchased separately.

Built today for tomorrow, this model comes with a minimum 2-year Warranty.

Delivery Information: This product is available for next day delivery or you may wish to choose from our premium White Glove delivery service. This service will involve your local authorised STIGA dealer preparing the product with a thorough pre-delivery inspection and delivering it ready to use at a time convenient to you. They will also demonstrate its safety features and how to use it.

Please allow up to 7 working days if you choose our White Glove delivery option, however, if your local dealer has the product in stock then delivery would normally be much sooner. This premium delivery service is available free of charge with this product.
More Information
Shop OnlineYes
Short DescriptionBrushcutter powered by a next-generation 48 V battery with a single handle and straight shaft, 38 cm cutting width, Tap&Go head and metal blade. Battery not included.
Series500 Series
EAN/UPC8008984811805
Unique selling point 02Single loop handle
Unique selling point 03Straight shaft
Unique selling point 0438 cm cutting width
Unique selling point 05Tap&Go dual-line trimmer head and 4T blade included
Unique selling point 064.0 Ah battery recommended (not included)
Unique selling point 01Powered by a next-generation 48 V battery
Key features 1 descriptionThe handy keypad with ergonomic switches is located on the handle in order to guarantee control and safety.
Key features 1 titleKeypad
Key features 1 image/S/B/SBC500AE_278200008ST1_detail02.jpg
Key features 2 titleTap & Go head
Key features 2 descriptionThis particular head enables the automatic release of the line with a simple tap on the ground.
Key features 2 image/S/B/SBC500AE_278200008ST1_detail03.jpg
Award 3 logono_selection
Award 2 logono_selection
Award 1 logono_selection
Certification CE logono_selection
Certification EAC logono_selection
FAQ 1 answerUsing this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
FAQ 1 questionWhat kind of protective gear should I use?
FAQ 2 questionWhat kind of maintenance should I carry out?
FAQ 2 answerTo ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.<br />Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
FAQ 3 questionWhich type of grass and shrubs can you work on?
FAQ 3 answerThis machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
FAQ 4 questionHow do you adjust the length of the line?
FAQ 4 answerThis model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.<br />For further information, see the instruction manual.
FAQ 5 questionThe line no longer feeds out from the head. What might have happened?
FAQ 5 answerThe line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.<br />These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.<br />Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Power0.5 kW
Power sourceLithium-ion battery
Battery capacity4 Ah
Suggested battery capacity4 Ah
Battery kitNot included
Motor typeBrushless
Maximum motor speed6000 rpm
Voltage48 V
Working time (+/- 20%)30 min
Nylon line diameter (millimeter)2
Cutting width38 cm
Cutting angleFixed
Nylon head typeTap & Go dual line easy load
Nylon line length4 m
Blade type4 T
Blade diameter255 mm
Handle typeLoop
Vibe Control System (VCS)No
Shaft typeStraight
Shaft tube diameter25.4 mm
Soft grip handleYes
HarnessSingle
Measured sound pressure level at operator ear dB(A)82.1
Guaranteed sound power level (LwA) - dB(A)96
Vibration level front handle (m/s2)3.63
Vibration level rear handle (m/s2)2.81
Measured sound power level dB(A)94.4
Pack weight5.2 kg
Product weight without cutting system4.3 kg
Product length1870 mm
Product width430 mm
Product height320 mm
Product weight4.000000
What's in the boxMetal blade
Product video - TitleSTIGA 500 Series System
Product video - URLhttps://youtu.be/sZsKQXroFys
How to video 1 - TitleSTIGA 500 Series System - Battery powered tools
How to video 1 - URLhttps://youtu.be/F7hD0p9nu_g
SKU278200008/ST1
Write Your Own Review
You're reviewing:SBC 500 AE

Key features

Product details and specs

The STIGA SBC 500 AE brushcutter is powered by a 48 V battery and a powerful brushless next-generation motor. The SBC 500 AE brushcutter was designed for maximum efficiency with all the advantages of battery power: lightweight, zero emissions, quiet and low maintenance. The intuitive keypad makes operation easy. The Tap&Go head, which releases the line by simply tapping the head on the ground, and the 4T metal disc are supplied as standard. The recommended 4.0 Ah battery can be purchased separately.

Built today for tomorrow, this model comes with a minimum 2-year Warranty.

Delivery Information: This product is available for next day delivery or you may wish to choose from our premium White Glove delivery service. This service will involve your local authorised STIGA dealer preparing the product with a thorough pre-delivery inspection and delivering it ready to use at a time convenient to you. They will also demonstrate its safety features and how to use it.

Please allow up to 7 working days if you choose our White Glove delivery option, however, if your local dealer has the product in stock then delivery would normally be much sooner. This premium delivery service is available free of charge with this product.

Keypad

The handy keypad with ergonomic switches is located on the handle in order to guarantee control and safety.

Tap & Go head

This particular head enables the automatic release of the line with a simple tap on the ground.

Technical specs

General info
Series500 Series
SKU278200008/ST1
EAN/UPC8008984811805
Cutting system
Nylon line diameter (millimeter)2
Cutting width38 cm
Cutting angleFixed
Nylon head typeTap & Go dual line easy load
Nylon line length4 m
Blade type4 T
Blade diameter255 mm
Vibration and noise data
Measured sound pressure level at operator ear dB(A)82
Guaranteed sound power level (LwA) - dB(A)96
Vibration level front handle (m/s2)3
Vibration level rear handle (m/s2)2
Measured sound power level dB(A)94
Power
Power0.5 kW
Power sourceLithium-ion battery
Battery capacity4 Ah
Suggested battery capacity4 Ah
Battery kitNot included
Motor typeBrushless
Maximum motor speed6000 rpm
Voltage48 V
Working time (+/- 20%)30 min
Equipment
Handle typeLoop
Shaft typeStraight
Shaft tube diameter25.4 mm
Soft grip handleYes
HarnessSingle
Overall dimensions
Pack weight5.2 kg
Product weight without cutting system4.3 kg
Product length1870 mm
Product width430 mm
Product height320 mm
Product weight4 kg

What's in the box

What's in the box

  • Metal blade

Support

Support

  • What kind of protective gear should I use?

    Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.

    Which type of grass and shrubs can you work on?

    This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.

    The line no longer feeds out from the head. What might have happened?

    The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
    These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
    Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.

    What kind of maintenance should I carry out?

    To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
    Remember that it is important to consult the user and maintenance manual for details of each of these tasks.

    How do you adjust the length of the line?

    This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
    For further information, see the instruction manual.

Compatible Products

Related Accessories

  1. SBT 540 AE
    SBT 540 AE
    4 Ah battery suitable for 500 Series products.
  2. SBT 520 AE
    SBT 520 AE
    2 Ah battery suitable for 500 Series products.
  3. SCG 515 AE
    SCG 515 AE
    Next-generation battery charger for STIGA's 500 Series batteries.
  4. SFC 530 AE
    SFC 530 AE
    Next-generation battery charger for quick charging of STIGA's 500 Series batteries.
  5. SBT 550 AE
    SBT 550 AE
    5 Ah battery suitable for 500 Series products.

CookieBot