SHT 500 AE

£109.00
SKU
278300008/ST1
Vat Included
Hedge trimmer powered by a next-generation 48 V battery with a 58 cm double-action blade and 180° rotating handle with 3 position settings. Battery not included.
  • check Powered by a next-generation 48 V battery
  • check 180° adjustable handle with 3 positions
  • check The 58 cm laser-cut blade delivers double cutting action
  • check 27 mm tooth spacing
  • check Blade speed 3500 spm
  • check 2.0 Ah battery not included
favorite Save for later
  • Free Shipping
The STIGA SHT 500 AE hedge trimmer has a next-generation battery motor that allows you to work with maximum freedom and comfort, ensuring low vibrations and less maintenance, as well as quiet and zero emissions. The 58 cm double-action laser-cut blade and rotating handle ensure a perfect cut. The 180° rotating handle can be set to 3 different positions to perform vertical, horizontal or lateral cutting while allowing the user to maintain a natural arm and wrist position. The intuitive keypad makes operation easy. The 2.0 Ah lithium-ion battery can be purchased separately. Built today for tomorrow, this model comes with a minimum 2-year Warranty. Delivery Information: This product is available for next day delivery or you may wish to choose from our premium White Glove delivery service. This service will involve your local authorised STIGA dealer preparing the product with a thorough pre-delivery inspection and delivering it ready to use at a time convenient to you. They will also demonstrate its safety features and how to use it. Please allow up to 7 working days if you choose our White Glove delivery option, however, if your local dealer has the product in stock then delivery would normally be much sooner. This premium delivery service is available free of charge with this product.
More Information
Shop OnlineYes
Short DescriptionHedge trimmer powered by a next-generation 48 V battery with a 58 cm double-action blade and 180° rotating handle with 3 position settings. Battery not included.
EAN/UPC8008984811812
Series500 Series System
Unique selling point 02180° adjustable handle with 3 positions
Unique selling point 062.0 Ah battery not included
Unique selling point 01Powered by a next-generation 48 V battery
Unique selling point 03The 58 cm laser-cut blade delivers double cutting action
Unique selling point 0427 mm tooth spacing
Unique selling point 05Blade speed 3500 spm
Key features 1 titleHandy controls
Key features 1 descriptionAll the switches are accessible and conveniently located on the handle, to allow the product to be used safely and easily.
Key features 1 image/S/H/SHT500AE_278300008ST1_detail01.jpg
Key features 2 titleDouble blade
Key features 2 descriptionThe laser-cut 58 cm double blade allows an immediate and precise cut. The gap between the teeth measures 27 mm.
Key features 2 image/S/H/SHT500AE_278300008ST1_detail06.jpg
Key features 3 titleRotating handle
Key features 3 descriptionThe ergonomic rear handle can be turned through 180° and can be set in five different positions to enable an easy shift from horizontal to vertical cutting.
Key features 3 image/S/H/SHT500AE_278300008ST1_detail05.jpg
Key features 4 titleSupports
Key features 4 descriptionThe supports located at the base of the product allow it to be rested on the ground in a stable position without any risk of damaging the machine.
Key features 4 image/S/H/SHT500AE_278300008ST1_detail02.jpg
Award 1 logono_selection
Award 2 logono_selection
Award 3 logono_selection
Certification CE logono_selection
Certification EAC logono_selection
FAQ 1 answerThe engine this machine is fitted with, along with the high capacity of the batteries available and the latest-generation blade, allow you to tackle dense and difficult bushes, including for longer periods of use. The distance between the teeth means even thicker branches can be cut through.
FAQ 1 questionWhich type of vegetation can you work on with this machine?
FAQ 2 questionWhat should I do when it is not being used?
FAQ 2 answerDuring the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the machine in a safe place, ensuring you protect the blade when in the storage area.
FAQ 3 questionDo the cutting blades need maintenance or sharpening?
FAQ 3 answerCutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
FAQ 4 questionThe blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?
FAQ 4 answerWhere the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
Suggested battery capacity2 Ah
Power sourceLithium-ion battery
Battery kitNot included
Motor typeWith brushes
Electric motor power420 W
Maximum motor speed21000 rpm
Voltage48 V
Working time (+/- 20%)50 min
Cutting length51 cm
Blade length58 cm
Blade typeDual action - Laser cut
Blade teeth speed3500 spm
Teeth distance27 mm
Cutting capacity (diameter)18 mm
Handle typeTurnable 180° - 3 positions
Vibe Control System (VCS)No
Soft grip handleYes
Guaranteed sound power level (LwA) - dB(A)94
Vibration level front handle (m/s2)2.32
Measured sound pressure level at operator ear dB(A)80.4
Vibration level rear handle (m/s2)2.32
Measured sound power level dB(A)91.4
Pack weight4.6 kg
Product weight3.500000
Product length1130 mm
Product width230 mm
Product height200 mm
SKU278300008/ST1
Write Your Own Review
You're reviewing:SHT 500 AE

Key features

Product details and specs

The STIGA SHT 500 AE hedge trimmer has a next-generation battery motor that allows you to work with maximum freedom and comfort, ensuring low vibrations and less maintenance, as well as quiet and zero emissions. The 58 cm double-action laser-cut blade and rotating handle ensure a perfect cut. The 180° rotating handle can be set to 3 different positions to perform vertical, horizontal or lateral cutting while allowing the user to maintain a natural arm and wrist position. The intuitive keypad makes operation easy. The 2.0 Ah lithium-ion battery can be purchased separately. Built today for tomorrow, this model comes with a minimum 2-year Warranty. Delivery Information: This product is available for next day delivery or you may wish to choose from our premium White Glove delivery service. This service will involve your local authorised STIGA dealer preparing the product with a thorough pre-delivery inspection and delivering it ready to use at a time convenient to you. They will also demonstrate its safety features and how to use it. Please allow up to 7 working days if you choose our White Glove delivery option, however, if your local dealer has the product in stock then delivery would normally be much sooner. This premium delivery service is available free of charge with this product.

Handy controls

All the switches are accessible and conveniently located on the handle, to allow the product to be used safely and easily.

Double blade

The laser-cut 58 cm double blade allows an immediate and precise cut. The gap between the teeth measures 27 mm.

Rotating handle

The ergonomic rear handle can be turned through 180° and can be set in five different positions to enable an easy shift from horizontal to vertical cutting.

Supports

The supports located at the base of the product allow it to be rested on the ground in a stable position without any risk of damaging the machine.

Technical specs

General info
EAN/UPC8008984811812
SKU278300008/ST1
Series500 Series System
Cutting system
Cutting length51 cm
Blade length58 cm
Blade typeDual action - Laser cut
Blade teeth speed3500 spm
Teeth distance27 mm
Cutting capacity (diameter)18 mm
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)94
Vibration level front handle (m/s2)2
Measured sound pressure level at operator ear dB(A)80
Vibration level rear handle (m/s2)2
Measured sound power level dB(A)91
Power
Suggested battery capacity2 Ah
Power sourceLithium-ion battery
Battery kitNot included
Motor typeWith brushes
Electric motor power420 W
Maximum motor speed21000 rpm
Voltage48 V
Working time (+/- 20%)50 min
Equipment
Handle typeTurnable 180° - 3 positions
Soft grip handleYes
Overall dimensions
Pack weight4.6 kg
Product weight3 kg
Product length1130 mm
Product width230 mm
Product height200 mm

Support

Support

  • Which type of vegetation can you work on with this machine?

    The engine this machine is fitted with, along with the high capacity of the batteries available and the latest-generation blade, allow you to tackle dense and difficult bushes, including for longer periods of use. The distance between the teeth means even thicker branches can be cut through.

    Do the cutting blades need maintenance or sharpening?

    Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance. After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade. Please see the user manual for more information on this point.

    What should I do when it is not being used?

    During the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the machine in a safe place, ensuring you protect the blade when in the storage area.

    The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?

    Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element. If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them. For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly. Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.

Compatible Products

Related Accessories

  1. SBT 540 AE
    SBT 540 AE
    4 Ah battery suitable for 500 Series products.
  2. SBT 520 AE
    SBT 520 AE
    2 Ah battery suitable for 500 Series products.
  3. SCG 515 AE
    SCG 515 AE
    Next-generation battery charger for STIGA's 500 Series batteries.
  4. SFC 530 AE
    SFC 530 AE
    Next-generation battery charger for quick charging of STIGA's 500 Series batteries.
  5. SBT 550 AE
    SBT 550 AE
    5 Ah battery suitable for 500 Series products.

CookieBot