SBC 656 DX

£439.00
SKU
283522008/ST1
Vat Included
Brushcutter powered by a 52.8 cc 2-stroke petrol engine with straight shaft, reinforced support, bike-style handle and 45 cm cutting width.
  • check 52.8 cc 2-stroke petrol engine
  • check Bike-style handle
  • check Straight shaft with reinforced support
  • check 45 cm cutting width
  • check Tap&Go dual-line, easy-load trimmer head and tri-arc blade included
  • check Double harness included

This product is not currently available for direct delivery please check with your local dealer for more info.

favorite Save for later
  • White glove
The STIGA SBC 656 DX brushcutter is powered by a 52.8 cc (net power output of 1.7 kW) 2-stroke petrol engine and has a 45 cm cutting width. The innovative EEM (electronic engine management) system makes for easy starting as the engine is electrically controlled, and it is designed without an air lever so that using it is fast and easy, with less energy consumption, less wear and longer performance. The reinforced forestry-style build of the well-balanced motor has reduced vibrations for user comfort. The ergonomic bike-style handlebars ensure total comfort and control of the brushcutter under all conditions. The new clip system lets you easily and quickly adjust the handle. The brushcutter is supplied with a metal tri-arc 3-point blade and latest-generation Tap&Go dual-line head that quickly releases the line by simply tapping the head on the ground.

Built today for tomorrow, this model comes with a minimum 2-year Domestic Warranty, 1-year Commercial Warranty

Delivery Information: This brushcutter will be delivered by our premium White Glove delivery service. Your local STIGA authorised dealer will prepare the machine with a thorough pre-delivery inspection and deliver it at a time convenient to you. They will also demonstrate its safety features and how to use the machine.

Please allow up to 7 working days for delivery, however, if your local dealer has the machine in stock then delivery would normally be much sooner.
This premium delivery service is available free of charge with this model.
More Information
Shop OnlineYes
Short DescriptionBrushcutter powered by a 52.8 cc 2-stroke petrol engine with straight shaft, reinforced support, bike-style handle and 45 cm cutting width.
EAN/UPC8008984812062
Unique selling point 0152.8 cc 2-stroke petrol engine
Unique selling point 03Straight shaft with reinforced support
Unique selling point 0445 cm cutting width
Unique selling point 05Tap&Go dual-line, easy-load trimmer head and tri-arc blade included
Unique selling point 06Double harness included
Unique selling point 02Bike-style handle
Key features 1 descriptionThe air filter cover can be easily opened using the specific knob, for rapid cleaning of the air filter and maintenance.
Key features 1 titleEasy access to the filter
Key features 1 image/S/B/SBC656DX_283522008ST1_detail05.jpg
Key features 2 titleHandle with soft touch grip, integrated controls and ON/OFF switch
Key features 2 descriptionAll the switches are located on the soft grip handle in order to guarantee control and safety.
Key features 2 image/S/B/SBC656DX_283522008ST1_detail02.jpg
Key features 3 titleAdjustable ergonomic handle
Key features 3 descriptionThe bike-style handlebars have an adjustment hook for adjusting the tilt, ensuring greater user comfort.
Key features 3 image/S/B/SBC656DX_283522008ST1_detail01.jpg
Key features 4 titleCable cover
Key features 4 descriptionThe cable is passed through a special protection located on the right-hand handlebar.
Key features 4 image/S/B/SBC656DX_283522008ST1_detail03.jpg
Key features 5 titleStarter block
Key features 5 descriptionThe innovative Electronic Engine Management (EEM) system allows for a quick start, with just 1-2 pulls.
Key features 5 image/S/B/SBC656DX_283522008ST1_detail04.jpg
Key features 6 titleEnhanced transmission
Key features 6 descriptionThis type of transmission makes the machine more robust and reduces its vibrations, making it suitable for heavy-duty work.
Key features 6 image/S/B/SBC656DX_283522008ST1_detail06.jpg
Award 3 logono_selection
Award 2 logono_selection
Award 1 logono_selection
Certification CE logono_selection
Certification EAC logono_selection
Certification GS logo/G/S/GS_TUV_RHEINLAND_5.jpg
FAQ 1 questionWhat kind of protective gear should I use?
FAQ 1 answerUsing this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
FAQ 2 questionWhat kind of maintenance should I carry out?
FAQ 2 answerTo ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.<br />Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
FAQ 3 questionWhich type of grass and shrubs can you work on?
FAQ 3 answerThis machine is able to tackle coarser plant conditions, from dense scrub with tall grass to shrub areas, where you can also cut the more stubborn plants using the supplied metal blade. The machine's powerful engine allows you to work on larger areas and for longer periods of use.
FAQ 4 questionHow do you adjust the length of the line?
FAQ 4 answerThis model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.<br />For further information, see the instruction manual.
FAQ 5 questionThe line no longer feeds out from the head. What might have happened?
FAQ 5 answerThe line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.<br />These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.<br />Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Power sourcePetrol 2-stroke
Power1.7 kW
Displacement52.8 cm³
Engine rotation speed7500 rpm
Maximum engine speed9500 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeAutomatic
Fuel tank capacity0.8 l
Carburettor typeButterfly valve
Ignition coil typeDigital
Air filter typePaper
Nylon line diameter (millimeter)3
Cutting width45 cm
Nylon head typeBump & Work dual line
Nylon line length4 m
Blade type3T ARC
Blade diameter255 mm
Handle typeBike
Vibe Control System (VCS)Yes
Shaft typeStraight - Forest type
Shaft tube diameter30 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessDouble Comfort
Included tools kitSpark plug key, screwdriver
Pack weight14.2 kg
Product weight without cutting system8.6 kg
Product weight8.200000
What's in the boxNylon head<br />Metal blade<br />Harness<br />Plastic bottle<br />Screwdriver<br />Socket spanner
SKU283522008/ST1
Write Your Own Review
You're reviewing:SBC 656 DX

Key features

Product details and specs

The STIGA SBC 656 DX brushcutter is powered by a 52.8 cc (net power output of 1.7 kW) 2-stroke petrol engine and has a 45 cm cutting width. The innovative EEM (electronic engine management) system makes for easy starting as the engine is electrically controlled, and it is designed without an air lever so that using it is fast and easy, with less energy consumption, less wear and longer performance. The reinforced forestry-style build of the well-balanced motor has reduced vibrations for user comfort. The ergonomic bike-style handlebars ensure total comfort and control of the brushcutter under all conditions. The new clip system lets you easily and quickly adjust the handle. The brushcutter is supplied with a metal tri-arc 3-point blade and latest-generation Tap&Go dual-line head that quickly releases the line by simply tapping the head on the ground.

Built today for tomorrow, this model comes with a minimum 2-year Domestic Warranty, 1-year Commercial Warranty

Delivery Information: This brushcutter will be delivered by our premium White Glove delivery service. Your local STIGA authorised dealer will prepare the machine with a thorough pre-delivery inspection and deliver it at a time convenient to you. They will also demonstrate its safety features and how to use the machine.

Please allow up to 7 working days for delivery, however, if your local dealer has the machine in stock then delivery would normally be much sooner.
This premium delivery service is available free of charge with this model.

Easy access to the filter

The air filter cover can be easily opened using the specific knob, for rapid cleaning of the air filter and maintenance.

Handle with soft touch grip, integrated controls and ON/OFF switch

All the switches are located on the soft grip handle in order to guarantee control and safety.

Adjustable ergonomic handle

The bike-style handlebars have an adjustment hook for adjusting the tilt, ensuring greater user comfort.

Cable cover

The cable is passed through a special protection located on the right-hand handlebar.

Starter block

The innovative Electronic Engine Management (EEM) system allows for a quick start, with just 1-2 pulls.

Enhanced transmission

This type of transmission makes the machine more robust and reduces its vibrations, making it suitable for heavy-duty work.

Awards and Certifications

Awards and Certifications

SBC 656 DX

Technical specs

General info
EAN/UPC8008984812062
SKU283522008/ST1
Cutting system
Nylon line diameter (millimeter)3
Cutting width45 cm
Nylon head typeBump & Work dual line
Nylon line length4 m
Blade type3T ARC
Blade diameter255 mm
Tools kit
Included tools kitSpark plug key, screwdriver
Power
Power sourcePetrol 2-stroke
Power1.7 kW
Displacement52.8 cm³
Engine rotation speed7500 rpm
Maximum engine speed9500 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeAutomatic
Fuel tank capacity0.8 l
Carburettor typeButterfly valve
Ignition coil typeDigital
Air filter typePaper
Equipment
Handle typeBike
Vibe Control System (VCS)Yes
Shaft typeStraight - Forest type
Shaft tube diameter30 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessDouble Comfort
Overall dimensions
Pack weight14.2 kg
Product weight without cutting system8.6 kg
Product weight8 kg

What's in the box

What's in the box

  • Nylon head

  • Metal blade

  • Harness

  • Plastic bottle

  • Screwdriver

  • Socket spanner

Support

Support

  • What kind of protective gear should I use?

    Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.

    Which type of grass and shrubs can you work on?

    This machine is able to tackle coarser plant conditions, from dense scrub with tall grass to shrub areas, where you can also cut the more stubborn plants using the supplied metal blade. The machine's powerful engine allows you to work on larger areas and for longer periods of use.

    The line no longer feeds out from the head. What might have happened?

    The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
    These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
    Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.

    What kind of maintenance should I carry out?

    To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
    Remember that it is important to consult the user and maintenance manual for details of each of these tasks.

    How do you adjust the length of the line?

    This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
    For further information, see the instruction manual.

Compatible Products

Related Accessories

CookieBot