SBC 226 J

£159.00
SKU
287120102/ST1
Vat Included
Brushcutter powered by a 25.4 cc spark ignition motor with straight shaft, single handle and 43 cm cutting width.
  • check 25.4 cc 2-stroke spark ignition motor
  • check Single loop handle
  • check Straight shaft
  • check 43 cm cutting width
  • check Tap&Go Dual Line (Pro) strimmer head and 3T blade included
  • check Single harness included

This product is not currently available for direct delivery please check with your local dealer for more info.

favorite Save for later
  • Free Shipping
The STIGA SBC 226 J brushcutter is powered by a 25.4 cc (0.7 kW) 2-stroke spark ignition motor and has a cutting width of 43 cm. This brushcutter has a jointed shaft meaning it can be separated into two parts to save storage space and for easier transportation. The single loop handle is ergonomic and makes the machine very manoeuvrable thanks to the supplied single harness. The SBC 226 J has a nylon Tap&Go head which quickly releases the line by simply tapping it on the ground and a 255 mm 3T blade which is ideal for cutting brushwood.

Built today for tomorrow, this model comes with a minimum 2-year Warranty
More Information
Shop OnlineYes
Short DescriptionBrushcutter powered by a 25.4 cc spark ignition motor with straight shaft, single handle and 43 cm cutting width.
EAN/UPC8008984799257
Unique selling point 0125.4 cc 2-stroke spark ignition motor
Unique selling point 03Straight shaft
Unique selling point 0443 cm cutting width
Unique selling point 05Tap&Go Dual Line (Pro) strimmer head and 3T blade included
Unique selling point 06Single harness included
Unique selling point 02Single loop handle
Award 3 logono_selection
Award 2 logono_selection
Award 1 logono_selection
Certification CE logono_selection
Certification EAC logono_selection
FAQ 1 questionWhat kind of protective gear should I use?
FAQ 1 answerUsing this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
FAQ 2 questionWhat kind of maintenance should I carry out?
FAQ 2 answerTo ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.<br />Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
FAQ 3 questionWhich type of grass and shrubs can you work on?
FAQ 3 answerThis machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
FAQ 4 questionHow do you adjust the length of the line?
FAQ 4 answerThis model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.<br />For further information, see the instruction manual.
FAQ 5 questionThe line no longer feeds out from the head. What might have happened?
FAQ 5 answerThe line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.<br />These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.<br />Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Power sourcePetrol 2-stroke
Power0.7 kW
Displacement25.4 cm³
Engine rotation speed11000 rpm
Maximum engine speed11000 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeManual
Fuel tank capacity0.65 l
Carburettor typeRotary valve
Ignition coil typeAnalogic
Air filter typeSponge
Nylon line diameter (millimeter)2,4
Cutting width43 cm
Nylon head typeBump & Work dual line
Nylon line length4 m
Blade type3 T
Blade diameter255 mm
Handle typeLoop
Vibe Control System (VCS)Yes
Shaft typeStraight split
Shaft tube diameter26 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessSingle
Included tools kitSpark plug key, screwdriver
Vibration level front handle (m/s2)5.76
Guaranteed sound power level (LwA) - dB(A)109
Measured sound pressure level at operator ear dB(A)89.2
Measured sound power level dB(A)107.02
Vibration level rear handle (m/s2)7.13
Pack weight10.3 kg
Product length1890 mm
Product width385 mm
Product height300 mm
Product weight6.300000
What's in the boxNylon head<br />Metal blade<br />Harness<br />Plastic bottle<br />Screwdriver<br />Socket spanner
How to video 1 - TitleHow to start the engine
How to video 1 - URLhttps://youtu.be/qs9Z7ushEkU
How to video 2 - TitleHow to fill the fuel tank
How to video 2 - URLhttps://youtu.be/wbQF8BNcUF8
How to video 3 - TitleHow to clean the air filter
How to video 3 - URLhttps://youtu.be/E5Hh7S8Esdk
How to video 4 - TitleHow to replace the trimming line
How to video 4 - URLhttps://youtu.be/Ui4U6mZDOAU
How to video 5 - TitleHow to mount the metal blade
How to video 5 - URLhttps://youtu.be/hBvmnRKrtpk
SKU287120102/ST1
Write Your Own Review
You're reviewing:SBC 226 J

Key features

Product details and specs

The STIGA SBC 226 J brushcutter is powered by a 25.4 cc (0.7 kW) 2-stroke spark ignition motor and has a cutting width of 43 cm. This brushcutter has a jointed shaft meaning it can be separated into two parts to save storage space and for easier transportation. The single loop handle is ergonomic and makes the machine very manoeuvrable thanks to the supplied single harness. The SBC 226 J has a nylon Tap&Go head which quickly releases the line by simply tapping it on the ground and a 255 mm 3T blade which is ideal for cutting brushwood.

Built today for tomorrow, this model comes with a minimum 2-year Warranty

Technical specs

General info
EAN/UPC8008984799257
SKU287120102/ST1
Cutting system
Nylon line diameter (millimeter)2,4
Cutting width43 cm
Nylon head typeBump & Work dual line
Nylon line length4 m
Blade type3 T
Blade diameter255 mm
Tools kit
Included tools kitSpark plug key, screwdriver
Overall dimensions
Pack weight10.3 kg
Product length1890 mm
Product width385 mm
Product height300 mm
Product weight6 kg
Power
Power sourcePetrol 2-stroke
Power0.7 kW
Displacement25.4 cm³
Engine rotation speed11000 rpm
Maximum engine speed11000 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
PrimerYes
ChokeManual
Fuel tank capacity0.65 l
Carburettor typeRotary valve
Ignition coil typeAnalogic
Air filter typeSponge
Equipment
Handle typeLoop
Vibe Control System (VCS)Yes
Shaft typeStraight split
Shaft tube diameter26 mm
Inner shaft diameter8 mm
Soft grip handleYes
HarnessSingle
Vibration and noise data
Vibration level front handle (m/s2)5
Guaranteed sound power level (LwA) - dB(A)109
Measured sound pressure level at operator ear dB(A)89
Measured sound power level dB(A)107
Vibration level rear handle (m/s2)7

What's in the box

What's in the box

  • Nylon head

  • Metal blade

  • Harness

  • Plastic bottle

  • Screwdriver

  • Socket spanner

Support

Support

  • What kind of protective gear should I use?

    Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.

    Which type of grass and shrubs can you work on?

    This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.

    The line no longer feeds out from the head. What might have happened?

    The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
    These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
    Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.

    What kind of maintenance should I carry out?

    To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the air filter, sparking plug and cutting head (trimmer head and guard) – parts where a lot of dirt constantly builds up.
    Remember that it is important to consult the user and maintenance manual for details of each of these tasks.

    How do you adjust the length of the line?

    This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
    For further information, see the instruction manual.

Compatible Products

Related Accessories

  1. EXTENSION POLE FOR BRUSHCUTTER
    EXTENSION POLE FOR BRUSHCUTTER
    Extension shaft for Alpina B 26 J brushcutter and T 26 J trimmer.
  2. HEDGETRIMMER ATTACHMENT
    HEDGETRIMMER ATTACHMENT
    Hedge trimmer attachment for Alpina B 26 J brushcutter and T 26 J trimmer.
  3. PRUNER SAW ATTACHMENT
    PRUNER SAW ATTACHMENT
    Pruner saw attachment for Alpina B 26 J brushcutter and T 26 J trimmer.

CookieBot