How should the grass cutter be cleaned after use?
We recommend cleaning the grass cutter in the normal way after each use. Before washing the grass cutter, we suggest that any residual grass or top soil is removed using the special STIGA scraper, which can be purchased separately.
Next, the inside of the chassis can be washed with water: connect the hose pipe to the washing link and follow the steps described in the user manual.
Which fuel and engine oil are recommended?
You should use petrol as fuel. In terms of engine oil, we recommend using the specific STIGA oil, which can be purchased separately. This will guarantee the best engine performance and optimal lubrication.
This grass cutter has a rear roller. What is this for?
The rear roller is designed to flatten the grass in the lawnmower's direction of travel to create the classic "stripes" and give the effect of an "English" lawn.
What is the cutting height set to?
The cutting height can be adjusted according to desired grass length. If the grass is very long, we recommend first mowing the lawn with the cutting deck in a higher position. Then, mow the lawn a second time with the cutting height set to the desired grass length. For information on cutting height positions, refer to the "Technical specs" section. Read the instruction manual carefully.
How should the oil level be measured?
To correctly measure the oil level, you need to make sure the lawnmower is on a flat surface, unscrew the cap which has a built-in dipstick for measuring, clean off any oil on the dipstick and reinsert it without screwing it in. Take the dipstick back out and check the level, which must lie between the MIN and MAX values. Top up, if required, and screw the cap back on. Full details can be found in the engine manual.
Where can I purchase a new blade?
When purchasing a new blade, we recommend that you contact an authorised STIGA dealer. To find your nearest retailer, go to the "find a dealer" section of the website's main menu.