Battery multi-tool
MT 100e
Adaptable and lightweight, with the MT 100e multi tool, there’s no need to climb ladders to take care of tall bushes and trees. Our ePower20V 4Ah battery (sold separately) gives you 70 minutes of cutting time and 20 minutes of pruning time on a single charge. Just plug in the hedge trimmer or pruner saw attachment, extend the telescopic shaft, and you’ll complete those essential gardening jobs quickly and easily – all while standing safely on the ground.
- Battery multi tool provides continuous hedge cutting and pruning (Battery sold separately)
- Ergonomic, streamlined design with soft grip handle
- Harness hooks into the multi-tool – for less effort and better balance
- 55cm telescopic extension - body + tool can reach 2.75m (hedge trimmer) and 2.55m (pruner saw)
- 46cm blade with 26mm tooth spacing cuts through medium-thick branches
- Battery and charger not included
Battery multi-tool
MT 100e
Often purchased together
Introducing our STIGA 20V battery multi- tool
Description
If standing on a ladder is the only way you can trim tall hedges, bushes and trees, the MT 100e could be the ideal solution. This versatile, battery-powered multi tool takes pruning and cutting tasks to new levels of effortless handling and manoeuvrability. The 20V 4Ah battery (sold separately) fits neatly into the compact design of the soft grip handle, making the whole tool feel comfortably balanced. You also get 70 minutes of cutting time and 20 minutes of pruning time on a single charge. Once you’ve hooked the multi tool into the harness, simply plug in either the hedge trimmer or pruner saw onto the end of the streamlined 55cm telescopic shaft and extend it up to 2.75m (user's body + tool) – that’s nearly the height of an average two-storey house. For hedge trimming, the 46cm laser cut blade is long enough to tackle most overhead jobs. And thanks to the 26mm spaced teeth and 112° rotating cutting head, it makes light work of even medium-thick branches. For pruning, the high-quality bar and chain gets in and around the tightest spots – while the automatic oil pump keeps every part of the pruner running smoothly.
Faqs
What type of maintenance should be done on the saw accessory tool?
To ensure the garden multi tool is functioning correctly and to maximise its lifetime, we recommended that you clean the battery housing and contacts, as well as the space behind the bar cover regularly (depending on the frequency and intensity of use), as dirt and sawdust constantly build up in these areas.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
Do the cutting blades need maintenance or sharpening?
Cutting (especially cutting hedges) leads to the accumulation of detritus and dirt between the blades. Without the necessary maintenance, this issue can reduce cutting performance.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades of the hedge cutting accessory seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
What should I do when it is not being used?
During the times when it is not being used, we recommend you clean the teeth of the cutting element and place the garden multi tool in a safe place, ensuring you protect the blade within their storage area.
Specifications
General info
EAN/UPC
8008984868625
SKU
271720008/ST1
Level
Essential
Series
Series 1, ePower 20V
Power
Power source
Battery
Number of batteries needed - not included
1
Suggested battery capacity
4 Ah
ePower
Yes
Power
0.28 kW
Voltage
20 Volt
Battery kit
Not included
Motor type
With brushes
Power (hedger function)
150 W
Power (pruner function)
280 W
Maximum motor speed
2500 rpm
Lithium battery nominal energy
72 Wh
Hedger working time (+/- 20%)
70 min
Pruner working time (+/- 20%)
20 min
Cutting system
Cutting length
42 cm
Blade length
46 cm
Blade type
Dual action
Blade teeth speed
2600 spm
Teeth distance
26 mm
Cutting capacity (diameter)
18 mm
Bar type
Sprocket nose
Bar length
20 cm
Bar length (inches)
8 in
Chain type
91PX- 033X
Chain speed
5 m/s
Chain oil tank capacity
0.115 l
Chain oil pump
Automatic
Chain tensioning system
Quick side tensioning
Equipment
Handle type
Rear handle
Vibe Control System (VCS)
No
Shaft tube diameter
26 mm
Hedger attachment
Yes
Soft grip handle
Yes
Shaft extension
55 cm
Telescopic handle extension length (min)
115 cm
Telescopic handle extension length (max)
170 cm
Harness
Yes
Pruner attachment
Yes
Tools kit
Battery charger
Single standard
Battery charger output current
2 A
Battery charger plug type
Europlug (Type C)
Overall dimensions
Pack weight
5.23 kg
Product length
2540 mm
Product width
90 mm
Product height
170 mm
Product weight
4.67 kg