SEV 2416 Q (16)"

Electric chainsaw with 2400 W motor and 40 cm (16") cutting bar.
  • check 2400 W electric motor
  • check 40 cm (16") cutting bar
  • check Chain speed of 13.5 m/s
  • check Net weight of 4.6 kg without bar and chain
  • check Quick chain tensioning system
The STIGA SEV 2416 Q is lightweight, easy to use and ergonomic, and combines the benefits of an electric chainsaw with the performance of a petrol-powered device. The SEV 2416 Q is powered by a 2400 W motor and offers low levels of noise and vibrations. It also ensures a perfect cut with no emissions. The weight of the motor is well-balanced to ensure user comfort for prolonged work sessions. This chainsaw has a 40 cm (16") bar and easy tensioning for quick and simple maintenance.
More Information
Short Description Electric chainsaw with 2400 W motor and 40 cm (16") cutting bar.
EAN/UPC 8008984623149
Unique selling point 05 Quick chain tensioning system
Unique selling point 01 2400 W electric motor
Unique selling point 04 Net weight of 4.6 kg without bar and chain
Unique selling point 03 Chain speed of 13.5 m/s
Unique selling point 02 40 cm (16") cutting bar
Award 1 logo no_selection
Award 2 logo no_selection
Award 3 logo no_selection
Certification CE logo no_selection
Certification EAC logo no_selection
Certification GS logo /G/S/GS_TUV_RHEINLAND_15.jpg
FAQ 1 answer Trousers, jackets and gloves, all made out of cut-resistant material, safety shoes and a protective helmet with sound attenuating ear-muffs and a protective visor are ideal equipment for cutting wood. Among the parts and accessories indicated for this model, there is a wide selection of products which can be used for suitable gear. We recommend that you exercise the utmost care as well as wearing appropriate clothing when using this type of machine, and that you bear in mind the importance of consulting the manual when you make your choice.
FAQ 1 question What kind of protective gear should I use?
FAQ 2 question What kind of maintenance should I carry out?
FAQ 2 answer To ensure that the machine is functioning correctly and to guarantee maximum longevity of the machine, we recommended that you clean the compartment located behind the bar cover regularly (depending on the frequency and intensity of use): this is an area in which dirt and sawdust constantly pile up.
We recommend that you constantly check the chain oil level inside the tank in order to always ensure that the cutting tool is properly lubricated. Next, make sure that the chain is always sharp, and if not, sharpen it or take it to an authorised service provider to have it sharpened.
We remind you of the importance to consult the manual to familiarise yourself with every detail of these operations.
FAQ 3 question How are the bar and chain lubricated?
FAQ 3 answer In order to guarantee perfect functionality, the bar and chain of this cutting device require constant lubrication. To this end, the machine is equipped with a chain oil tank, which should be constantly monitored to ensure that the fluid never runs out. The oil is pumped automatically.
FAQ 4 question How can the chain be sharpened?
FAQ 4 answer Every machine is supplied with a metal rod which you can use to sharpen the chain yourself. This method required you to sharped each tooth individually. Before you start sharpening the chain yourself, we recommend that you carefully consult and follow the detailed instructions which are found in the manual. The STIGA dealer network offers sharpening services if you prefer to have your cutting device sharpened by a professional. You can also see an overview of the services STIGA offers in this area by consulting the Parts and Accessories section of this website.
FAQ 5 question How often should the chain be replaced?
FAQ 5 answer The chain will wear down, and how quickly this happens will depends on the frequency and intensity of use, as well as the type of wood cut.
When the cutting performance remains poor despite sharpening, you will need to replace the chain. You will find compatible replacements among the parts and accessories on this page.
FAQ 6 question Which replacement chain should I use for this product?
FAQ 6 answer We recommend that you replace the original with a new STIGA chain. Each chainsaw model can fit specific types of chains, depending on the characteristics of the machine and the bar length. To know which type you should use with this model, we recommend that you go to the parts and accessories section on the website, or else refer to the manual.
Power source Electric
Motor type With brushes
Electric motor power 2400 W
Maximum motor speed 8650 rpm
Bar type Sprocket nose
Bar length 40 cm
Bar length (inches) 16 in
Chain type 3/8" .050" (91P0057X)
Chain speed 13.5 m/s
Chain brake Manual and inertial
Chain oil tank capacity 0.23 l
Chain oil pump Automatic
Chain tensioning system Quick side tensioning
Handle type Rear handle
Vibe Control System (VCS) No
Soft grip handle Yes
Plug type Schuko (Type F)
Included tools kit Bar key
Guaranteed sound power level (LwA) - dB(A) 107
Vibration level rear handle (m/s2) 3.838
Measured sound power level dB(A) 104
Vibration level front handle (m/s2) 3.838
Measured sound pressure level at operator ear dB(A) 84.92
Pack weight 6.8 kg
Product weight 6.400000
Product length 970 mm
Product width 200 mm
Product height 240 mm
What's in the box Bar key
How to video 1 - Title Safety clothing resistance
How to video 1 - URL https://youtu.be/LjDKM7ird4A
How to video 2 - Title How to activate the safety chain brake
How to video 2 - URL https://youtu.be/cilP3TzmjtA
How to video 3 - Title How to sharpen the chain
How to video 3 - URL https://youtu.be/O_pXt6jZQkw
SKU 292816182/14
Write Your Own Review
You're reviewing:SEV 2416 Q (16)"

Key features

Product details and specs

The STIGA SEV 2416 Q is lightweight, easy to use and ergonomic, and combines the benefits of an electric chainsaw with the performance of a petrol-powered device. The SEV 2416 Q is powered by a 2400 W motor and offers low levels of noise and vibrations. It also ensures a perfect cut with no emissions. The weight of the motor is well-balanced to ensure user comfort for prolonged work sessions. This chainsaw has a 40 cm (16") bar and easy tensioning for quick and simple maintenance.

Awards and Certifications

Awards and Certifications

SEV 2416 Q (16)"

Technical specs

General info
EAN/UPC8008984623149
SKU292816182/14
Cutting system
Bar typeSprocket nose
Bar length40 cm
Bar length (inches)16 in
Chain type3/8" .050" (91P0057X)
Chain speed13.5 m/s
Chain brakeManual and inertial
Chain oil tank capacity0.23 l
Chain oil pumpAutomatic
Chain tensioning systemQuick side tensioning
Tools kit
Included tools kitBar key
Overall dimensions
Pack weight6.8 kg
Product weight6 kg
Product length970 mm
Product width200 mm
Product height240 mm
Power
Power sourceElectric
Motor typeWith brushes
Electric motor power2400 W
Maximum motor speed8650 rpm
Equipment
Handle typeRear handle
Soft grip handleYes
Plug typeSchuko (Type F)
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)107
Vibration level rear handle (m/s2)3
Measured sound power level dB(A)104
Vibration level front handle (m/s2)3
Measured sound pressure level at operator ear dB(A)84

What's in the box

What's in the box

  • Bar key

Support

Support

  • What kind of protective gear should I use?

    Trousers, jackets and gloves, all made out of cut-resistant material, safety shoes and a protective helmet with sound attenuating ear-muffs and a protective visor are ideal equipment for cutting wood. Among the parts and accessories indicated for this model, there is a wide selection of products which can be used for suitable gear. We recommend that you exercise the utmost care as well as wearing appropriate clothing when using this type of machine, and that you bear in mind the importance of consulting the manual when you make your choice.

    How are the bar and chain lubricated?

    In order to guarantee perfect functionality, the bar and chain of this cutting device require constant lubrication. To this end, the machine is equipped with a chain oil tank, which should be constantly monitored to ensure that the fluid never runs out. The oil is pumped automatically.

    How often should the chain be replaced?

    The chain will wear down, and how quickly this happens will depends on the frequency and intensity of use, as well as the type of wood cut. When the cutting performance remains poor despite sharpening, you will need to replace the chain. You will find compatible replacements among the parts and accessories on this page.

    What kind of maintenance should I carry out?

    To ensure that the machine is functioning correctly and to guarantee maximum longevity of the machine, we recommended that you clean the compartment located behind the bar cover regularly (depending on the frequency and intensity of use): this is an area in which dirt and sawdust constantly pile up. We recommend that you constantly check the chain oil level inside the tank in order to always ensure that the cutting tool is properly lubricated. Next, make sure that the chain is always sharp, and if not, sharpen it or take it to an authorised service provider to have it sharpened. We remind you of the importance to consult the manual to familiarise yourself with every detail of these operations.

    How can the chain be sharpened?

    Every machine is supplied with a metal rod which you can use to sharpen the chain yourself. This method required you to sharped each tooth individually. Before you start sharpening the chain yourself, we recommend that you carefully consult and follow the detailed instructions which are found in the manual. The STIGA dealer network offers sharpening services if you prefer to have your cutting device sharpened by a professional. You can also see an overview of the services STIGA offers in this area by consulting the Parts and Accessories section of this website.

    Which replacement chain should I use for this product?

    We recommend that you replace the original with a new STIGA chain. Each chainsaw model can fit specific types of chains, depending on the characteristics of the machine and the bar length. To know which type you should use with this model, we recommend that you go to the parts and accessories section on the website, or else refer to the manual.

Compatible Products

Related Accessories

  1. ADJUSTABLE JET NOZZLE T2
    ADJUSTABLE JET NOZZLE T2
    Adjustable jet head with adjustment from jet to fan spray for STIGA washer HPS 235 R.
  2. ROUND FILE 5/32 4,0 MM
    ROUND FILE 5/32 4,0 MM"
    Round STIGA file with a 4 mm diameter, for sharpening chainsaw chains.
  3. FILING KIT 5/32 4,0 MM
    FILING KIT 5/32 4,0 MM"
    STIGA kit for sharpening chainsaw chains.
  4. BIODEGRADABLE CHAIN OIL 5L
    BIODEGRADABLE CHAIN OIL 5L
    STIGA biodegradable viscous chain oil in 5-litre bottle.
  5. PROTECTIVE LEGGINGS
    PROTECTIVE LEGGINGS
    STIGA over-trousers with class 1 chainsaw protection (20 m/s) type A. Single size.
  6. FORESTAL JACKET
    FORESTAL JACKET
    STIGA forest jacket in stretch micro-rip material with Pezatec protection. Size S.
  7. FORESTAL JACKET
    FORESTAL JACKET
    STIGA forest jacket in 4-way stretch micro-rip with Pezatec® protection. Size M.
  8. FORESTAL JACKET
    FORESTAL JACKET
    STIGA forest jacket in stretch micro-rip material with Pezatec protection. Size L.
  9. FORESTAL JACKET
    FORESTAL JACKET
    STIGA forest jacket in stretch micro-rip material with Pezatec protection. Size XL.
  10. FORESTAL JACKET
    FORESTAL JACKET
    STIGA forest jacket in stretch micro-rip material with Pezatec protection. Size XXL.
  11. PROTECTIVE TROUSERS
    PROTECTIVE TROUSERS
    STIGA protective trousers with class 1 chainsaw protection (20 m/s) type A in stretch material with yellow markings. Size S.
  12. PROTECTIVE TROUSERS
    PROTECTIVE TROUSERS
    STIGA protective trousers with class 1 chainsaw protection (20 m/s) type A in stretch material with yellow markings. Size M.
  13. PROTECTIVE TROUSERS
    PROTECTIVE TROUSERS
    STIGA protective trousers with class 1 chainsaw protection (20 m/s) type A in stretch material with yellow markings. Size L.
  14. PROTECTIVE TROUSERS
    PROTECTIVE TROUSERS
    STIGA protective trousers with class 1 chainsaw protection (20 m/s) type A in stretch material with yellow markings. Size XL.
  15. PROTECTIVE TROUSERS
    PROTECTIVE TROUSERS
    STIGA protective trousers with class 1 chainsaw protection (20 m/s) type A in stretch material with yellow markings. Size XXL.
  16. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 8.
  17. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 9.
  18. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 10.
  19. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 11.
  20. TECHNICAL GLOVES
    TECHNICAL GLOVES
    Anti-vibration and non-slip STIGA protective gloves, size 12.
  21. BRACES WITH LOOPS
    BRACES WITH LOOPS
    Adjustable universal STIGA harness with rings. Black and white with logo.
  22. BRACES WITH CLIPS
    BRACES WITH CLIPS
    Adjustable universal STIGA harness with clips. Black and white with logo.
  23. MINERAL CHAIN OIL 1L
    MINERAL CHAIN OIL 1L
    STIGA protective mineral oil for lubrication of all types of chainsaw chains in a 1-litre bottle.
  24. MINERAL CHAIN OIL 5L
    MINERAL CHAIN OIL 5L
    STIGA protective mineral oil for lubrication of all types of chainsaw chains in a 5-litre bottle.
  25. CHAIN 3/8 .050
    CHAIN 3/8 .050" (1.3mm) 57E"
    Chain for STIGA 3/8" mini .050" (91PX057E)-type chainsaw suitable for 40 cm (16") bars.
  26. CH. REEL 3/8”MINI .050”(1.3MM)
    CH. REEL 3/8”MINI .050”(1.3MM)
    Chain roll for STIGA 3/8" LP .050-type chainsaw (91 PX - 100R).