Ask the Experts on 0800 669 6326 Mon - Fri 9am-4:30pm or Contact Us
Cordless garden multi tool
MT 500e
£246.00
Vat IncludedThe MT 500e is a light and powerful cordless multi tool – comprising a telescopic shaft, hedge trimmer attachment and pruner attachment – that can easily trim and prune hard to reach bushes and trees. Powered by a 48V battery, this sturdy garden multi tool will give you up to 50 minutes trimming time, or 20 minutes pruning time, on one charge (48V,5Ah). And with a 112° rotating cutting head, you'll easily find the most comfortable working angle for you.
- Lightweight battery multi tool for hedge cutting and pruning
- 112° rotating cutting head, soft touch rubber grip handle and shaft
- 75cm telescopic extension reaches 2.95m - hedge trimmer and 2.70m - pruner saw
- 46cm dual action laser-cut hedge trimmer blade and 25cm pruner cutting bar
- 5-year warranty (T&C's Apply)
- Suggested battery: STIGA ePower E 420 (2Ah) - sold separately
Cordless garden multi tool
MT 500e
£246.00
Vat Included Often purchased together
Battery
Voltage
48 Volt
Battery capacity
7.5 Ah
Lithium battery nominal energy
324 Wh
Special Price £229.00 Regular Price £259.00 Your Saving: -12%
In stock
Battery
Voltage
48 Volt
Battery capacity
4 Ah
Lithium battery nominal energy
177.6 Wh
£142.00
In stock
Battery charger
Voltage
48 Volt
Charging current
1.5 A
Charging speed
Standard
Battery charger
Voltage
48 Volt
Charging current
1.5 A
Charging speed
Standard
Battery charger
Voltage
48 Volt
Charging current
3 A
Charging speed
Fast
Battery
Voltage
48 Volt
Battery capacity
2 Ah
Lithium battery nominal energy
88.8 Wh
Battery
Voltage
48 Volt
Battery capacity
5 Ah
Lithium battery nominal energy
222 Wh
Battery powered – cable-free
This cordless multi tool is perfect for smoothly cutting and pruning bushes and trees, free from trailing cables.
Handy, extendable telescopic shaft
High bushes and trees? No problem. Just pull out the 75cm extension shaft to the length you need – reaching a maximum height of 4.30m with the hedge trimmer blade, and 4m with the pruner saw.
Description
Forget about climbing ladders and trees. The MT 500e lightweight cordless multi tool gives you high-reach-battery powered hedge cutting and pruning – free from the noise and fumes of a typical petrol multi tool. Driven by a powerful 48V battery, the MT 500e and its 46cm durable dual-action laser-cut blade and 25cm cutting bar, will slice smoothly through your garden foliage.
To reach those lofty trees and hedges, this garden multi tool comes with a 75cm telescopic extension, giving you a maximum reachable height of 4.30m with the hedge trimmer and 4m with the pruner saw. A high-performance chain on the cutting bar also minimises kickbacks. It's comfortable too, thanks to its six-position 112° rotating cutting head, letting you tackle plants from strain-free angles. And with a soft touch rubber grip handle and shaft, and harness hook, you'll complete your tasks without harming your hands and limbs. For a safe, comfortable and precise cut, the MT 500e features a bumper under the guide bar, for leaning against branches while you work. Batteries & charger are NOT included, available to purchase separately
A 5-year manufacturer's warranty is included with this model (T&C's apply).
For advice on the garden product best suited to your requirements please call our Technical Helpline on 0800 669 6326 or contact your local STIGA Dealer who will be happy to advise you.
To reach those lofty trees and hedges, this garden multi tool comes with a 75cm telescopic extension, giving you a maximum reachable height of 4.30m with the hedge trimmer and 4m with the pruner saw. A high-performance chain on the cutting bar also minimises kickbacks. It's comfortable too, thanks to its six-position 112° rotating cutting head, letting you tackle plants from strain-free angles. And with a soft touch rubber grip handle and shaft, and harness hook, you'll complete your tasks without harming your hands and limbs. For a safe, comfortable and precise cut, the MT 500e features a bumper under the guide bar, for leaning against branches while you work. Batteries & charger are NOT included, available to purchase separately
A 5-year manufacturer's warranty is included with this model (T&C's apply).
For advice on the garden product best suited to your requirements please call our Technical Helpline on 0800 669 6326 or contact your local STIGA Dealer who will be happy to advise you.
Faqs
What type of maintenance should be done on the saw accessory tool?
To ensure the garden multi tool is functioning correctly and to maximise its lifetime, we recommended that you clean the battery housing and contacts, as well as the space behind the bar cover regularly (depending on the frequency and intensity of use), as dirt and sawdust constantly build up in these areas.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
Do the cutting blades need maintenance or sharpening?
Cutting (especially cutting hedges) leads to the accumulation of detritus and dirt between the blades. Without the necessary maintenance, this issue can reduce cutting performance.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades of the hedge cutting accessory seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
What should I do when it is not being used?
During the times when it is not being used, we recommend you clean the teeth of the cutting element and place the garden multi tool in a safe place, ensuring you protect the blade within their storage area.
Are the batteries included?
No, the battery and the charger are sold separately.
The suggested battery is a 48V ePower battery (2 Ah).
The suggested battery is a 48V ePower battery (2 Ah).
Technical Specifications
General info
EAN/UPC
8008984855373
SKU
278720008/ST3
Level
Experience
Power
Power source
Battery
Number of batteries needed - not included
1
Suggested battery capacity
2 Ah
ePower
Yes
Power
0.4 kW
Voltage
48 Volt
Battery kit
Not included
Motor type
With brushes
Power (hedger function)
0.4 kW
Power (pruner function)
0.4 kW
Lithium battery nominal energy
86.4 Wh
Hedger working time (+/- 20%)
20 min
Pruner working time (+/- 20%)
8 min
Cutting system
Cutting length
44 cm
Blade length
46 cm
Blade type
Dual action - Laser cut
Blade teeth speed
3000 spm
Teeth distance
28 mm
Cutting capacity (diameter)
18 mm
Blade rotation angle
112 °
Bar type
Sprocket nose
Bar length
25 cm
Bar length (inches)
10 in
Chain type
3/8" .050" (91PX040E)
Chain speed
5 m/s
Chain oil tank capacity
0.085 l
Chain oil pump
Automatic
Chain tensioning system
Front screw tensioning
Equipment
Handle type
Rear handle
Vibe Control System (VCS)
No
Hedger attachment
Yes
Soft grip handle
Yes
Shaft extension
75 cm
Telescopic handle extension length (max)
295 cm
Harness
Single
Pruner attachment
Yes
Tools kit
Battery charger
Single standard
Battery charger output current
1.5 A
Battery charger plug type
Europlug (Type C)
Overall dimensions
Pack weight
10.04 kg
Product weight (hedger version)
5.7 kg
Product weight (pruner version)
5.2 kg
Product length
2350 mm
Product width
120 mm
Product height
130 mm
Weight
4.7 kg
What's in the box
Padded single harness
Free Delivery
White glove service
Payments