Battery grass trimmer
GT 100e
Comfortable and easy to handle, the GT 100e battery grass trimmer makes tidying your lawn, trees, shrubs and fences a pleasure, not a chore. Thanks to its compact design and optimally balanced 20V ePower battery (sold separately) – developed and tested by STIGA in Italy – you get 20 minutes of effortless trimming on a single charge.
- Battery grass trimmer for cable-free, stress-free trimming
- Soft grip ergonomic handle, adjustable loop handle, adjustable moving head and streamlined design provide comfortable, easy handling
- Adjustable telescopic shaft to match your size and reach
- Powerful motor and single line auto-feed provides uninterrupted trimming to the end of battery charge
- Go from trimming to edging in one click – with handy foldable spacer bracket for precise trimming
- Battery and charger not included
Battery grass trimmer
GT 100e
Often purchased together
Introducing our STIGA 20V battery lawn trimmer
Description
The GT 100e battery-powered grass trimmer makes trimming and edging a joy. This trimmer comes with a powerful motor, optimally balanced 20V 2Ah battery (sold separately), and soft grip ergonomic handle, so you can cut away weeds with ease. Its auto-feeding nylon gives you reliable and uninterrupted trimming – while a fully adjustable loop handle lets you manoeuvre your lawn trimmer without straining. For your complete comfort, you can also adjust the GT 100e telescopic shaft to your height. It's easy to use too. With one click, you can switch from trimming to edging mode, including an edging function rotating 90° on one side to refine your lawn, borders and driveway. Its rotating head – adjustable up to 45° – also gives you the perfect trim – with a spacer bracket that lets you cut precisely around plants and other objects.
Faqs
What kind of protective gear should I use?
Using this machine requires clothing that protects the legs and face from objects that could unexpectedly be thrown out during operation. It is always recommended to wear long trousers and a protective visor.
What kind of maintenance should I carry out?
To ensure that the machine is functioning correctly and to maximise its lifespan, we recommend regular (based on the frequency and intensity of use) cleaning of the battery housing and contacts as well as the cutting head (trimmer head and guard) - parts where a lot of dirt constantly builds up.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Remember that it is important to consult the user and maintenance manual for details of each of these tasks.
Which type of grass and shrubs can you work on?
This machine is able to tackle coarser plant conditions, from dense bushes with tall grass to shrub areas, where you can also cut the more stubborn plants and shrubs using the supplied metal blade.
How do you adjust the length of the line?
This model is fitted with a head using the Tap&Go system. This means that, while the machine is operating, you just have to press the control lever all the way to bring the head to maximum rotation and at the same time knock the head against the ground, which causes the line to feed out automatically. Its length can be adjusted simply, by cutting any excess to the length of the cutting blade located on the end of the guard.
For further information, see the instruction manual.
For further information, see the instruction manual.
The line no longer feeds out from the head. What might have happened?
The line failing to feed out may be associated with two main factors. The first, and the most likely, is that the line might be all used up and should therefore be replaced with a new reel. There is also the possibility that the line within the head has accidentally become caught in its own windings, and is preventing the end from freely feeding out through the holes. In this case, simply open the head and re-spool the line correctly inside.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
These causes and solutions normally cover the majority of cases, but there may be a variety of others, associated with the methods of use, the surface treated and the weather conditions.
Note that consulting the user manual, in the section relating to the cutting head, may provide useful information for identifying the nature of the problem.
Specifications
General info
EAN/UPC
8008984868601
SKU
271100008/ST1
Level
Essential
Series
Series 1, ePower 20V
Power
Power source
Battery
Number of batteries needed - not included
1
Suggested battery capacity
2 Ah
ePower
Yes
Power
0.15 kW
Voltage
20 Volt
Battery kit
Not included
Motor type
With brushes
Maximum motor speed
8000 rpm
Lithium battery nominal energy
36 Wh
Working time (+/- 20%)
20 min
Cutting system
Nylon line diameter (millimeter)
1,6
Cutting width
25 cm
Cutting angle
Adjustable
Nylon head type
Automatic single line
Nylon line length
4 m
Equipment
Handle type
Loop
Vibe Control System (VCS)
No
Shaft type
Telescopic
Shaft tube diameter
30 mm
Inner shaft diameter
26 mm
Soft grip handle
No
Harness
No
Tools kit
Battery charger
Single standard
Battery charger output current
2 A
Battery charger plug type
Europlug (Type C)
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
92
Measured sound power level dB(A)
87.5
Measured sound pressure level at operator ear dB(A)
82.1
Vibration level front handle (m/s2)
2.87
Vibration level rear handle (m/s2)
4.98
Overall dimensions
Pack weight
3.4 kg
Product weight without battery
1.96 kg
Product length
1290 mm
Product width
300 mm
Product height
200 mm
Downloads
User manual Download