Ask our Call Center at +39 04231945560 Mon-Fri 09.00-17.00 or Contact Us
Battery hedge trimmer
SHT 900 AE
Heavy-duty performance. Light, balanced handling. Weighing only 6kg, the SBC 900 D AE bike brushcutter effortlessly sweeps through tall grass and large areas of tough growth. Working up to 25 min with 1x5 Ah battery and up to 70 minutes with 2x 7.5 Ah batteries. If you need an extra surge of power, just push the trigger on the rotatable bike handlebar for instant acceleration.
- Battery hedge trimmer delivers up to 70 minutes of powerful cutting action
- 500W brushless motor ensures high-performance, continuous trimming
- Intuitive keypad for easy variable speed control and battery power management
- Ergonomic, soft-grip 180° rotating handle can be adjusted into three positions
- Robust cutter bar made from lightweight aluminium and high carbon steel
- Suggested batteries: 2 x STIGA ePower E 475 (7,5Ah) to be used with STIGA battery harness SBH 900 AE - sold separately
Battery hedge trimmer
SHT 900 AE
Often purchased together
Battery
Voltage
48 Volt
Battery capacity
7.5 Ah
Lithium battery nominal energy
333 Wh
Battery
Voltage
48 Volt
Battery capacity
4 Ah
Lithium battery nominal energy
177.6 Wh
Enjoy the strength of ePower.
High-efficiency brushless motor
500W output drives both blades for powerful precision cutting.
90º rotation in either direction
Soft-grip, vibration-absorbing handle can be turned 90° left or 90° right in three positions – for precise vertical and horizontal cutting.
Introducing our 9 Series STIGA battery brushcutter
Description
The SBC 900 D AE brushcutter delivers the performance of a 45cc petrol brush cutter – minus the hassle of refueling and emissions. Working up to 25 min with 1x5 Ah battery
and up to 70 minutes with 2x 7.5 Ah batteries. And because these are held in a comfortable, connecting harness, you experience the optimal balance of power and weight. From large gardens and farms to city parks, wherever you’re working, the ergonomic bike handle design and compact guard makes clearing tall grass or tough vegetation easy. A 1Kw electric brushless transmission drives the aluminium gearcase, delivering high-power torque and progressive speed reduction, while keeping the noise level below 96 dbA. And for easy control, the soft-grip handlebar displays four integrated LEDS for battery level monitoring. The 43cm cutting width also features the Bump & Work system for quick line feeding of the cutting head. When the job’s complete, the handle folds 90° to make transport and storage simple.
and up to 70 minutes with 2x 7.5 Ah batteries. And because these are held in a comfortable, connecting harness, you experience the optimal balance of power and weight. From large gardens and farms to city parks, wherever you’re working, the ergonomic bike handle design and compact guard makes clearing tall grass or tough vegetation easy. A 1Kw electric brushless transmission drives the aluminium gearcase, delivering high-power torque and progressive speed reduction, while keeping the noise level below 96 dbA. And for easy control, the soft-grip handlebar displays four integrated LEDS for battery level monitoring. The 43cm cutting width also features the Bump & Work system for quick line feeding of the cutting head. When the job’s complete, the handle folds 90° to make transport and storage simple.
Faqs
Which type of vegetation can you work on with this machine?
The engine this machine is fitted with, along with the high capacity of the batteries available and the latest-generation blade, allow you to tackle dense and difficult bushes, including for longer periods of use. The distance between the teeth means even thicker branches can be cut through.
What should I do when it is not being used?
During the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the machine in a safe place, ensuring you protect the blade when in the storage area.
Do the cutting blades need maintenance or sharpening?
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
Specifications
General info
EAN/UPC
8008984844186
SKU
279300008/ST1
Level
Expert
Series
Series 9, ePower 48 V
Power
Power source
Battery
Number of batteries needed - not included
1
Suggested battery capacity
2 x 7,5 Ah
ePower
Yes
Power
0.5 kW
Voltage
48 Volt
Battery kit
Not included
Motor type
Brushless
Maximum motor speed
18000 rpm
Lithium battery nominal energy
324 Wh
Working time (+/- 20%)
180 min
Cutting system
Cutting length
61 cm
Blade length
82 cm
Blade type
Dual action - Laser cut
Blade teeth speed
3300 spm
Teeth distance
40 mm
Cutting capacity (diameter)
33 mm
Equipment
Handle type
Turnable 180° - 3 positions
Vibe Control System (VCS)
Yes
Soft grip handle
Yes
Tools kit
Battery charger
Single fast
Battery charger output current
1.5 A
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
94
Measured sound power level dB(A)
91.2
Measured sound pressure level at operator ear dB(A)
80.8
Vibration level hand (m/s2)
5.11
Overall dimensions
Pack weight
6.4 kg
Product weight without battery
4.6 kg
Product weight
4.6 kg
Product length
1220 mm
Product width
230 mm
Product height
190 mm
Instructions
Downloads
User manual Download
Related Products
Battery hedge trimmer
Cutting length
54 cm
Power
0.4 kW
Product weight
2.9 kg
Battery hedge trimmer
Cutting length
50 cm
Power
0.15 kW
Product weight
2.615 kg
Battery hedge trimmer
Cutting length
54 cm
Power
0.4 kW
Product weight
3.7 kg
Battery hedge trimmer
Cutting length
51 cm
Power
0.35 kW
Product weight
3.5 kg
Battery hedge trimmer
Cutting length
50 cm
Power
0.15 kW
Product weight
2.25 kg
Electric hedge trimmer
Cutting length
55 cm
Power
0.6 kW
Product weight
3.25 kg
Electric hedge trimmer
Cutting length
45 cm
Power
0.5 kW
Product weight
3.05 kg
Petrol hedge trimmer
Cutting length
45 cm
Power
0.65 kW
Product weight
5.6 kg
Battery hedge trimmer
Cutting length
51 cm
Power
0.4 kW
Product weight
5.18 kg