Ask the Experts on 0800 669 6326 Mon - Fri 9am-4:30pm or Contact Us
Cordless hedge trimmer
HT 500e
Special Price £129.00 Regular Price £159.00 Your Saving: -19%
Vat IncludedPower and precision – it's all packed into this cordless hedge trimmer. Driven by a 48V 2Ah battery, the HT 500e hedge trimmer gives you up to 50 minutes of low-vibration, low-noise, zero-emission cutting on one charge. Thanks to its 58cm hardened steel dual-action blade and 180° rotating handle, you'll cut through hedges, branches and bushes with ease.
- Battery hedge trimmer for comfortable, emissions-free trimming
- Ergonomic, soft grip 180° rotating handle
- Safety switches protect you while you work
- Cuts through medium-thick branches
- 5-year warranty (T&C's Apply)
- Suggested battery: STIGA ePower E 420 (2Ah) - sold separately
Cordless hedge trimmer
HT 500e
Special Price £129.00 Regular Price £159.00 Your Saving: -19%
Vat Included Buy the kit
HT500e+2Ah battery +battery
- 1 x HT 500e
- 1 x E 420
- 1 x EC 415 SU
HT500e+2Ah battery +battery
- 1 x HT 500e
- 1 x E 420
- 1 x EC 415 SU
£199.00
£323.00
Your Saving:
-38% OFF
Vat Included
Often purchased together

Comfortable from every angle
Featuring a flexible 180° rotation, the ergonomically shaped soft grip handle moves into three positions – making vertical and horizontal cutting more comfortable.
Description
The HT 500e is a powerful battery hedge trimmer that enables you to cut comfortably – free from messy cables and petrol fumes – for around 50 minutes on one charge. Its 58cm double-action laser-cut blades slash through hedges and bushes with ease. And to maintain a natural arm and wrist position, you can set the 180° rotating handle to three different positions. The intuitive keypad makes operation easy, while handle and rear trigger safety switches protect you while you work. Built-in blade tip protection prevents damage to walls and paths. Your hedge trimmer also comes with a handy hanging hole. So when your garden's looking shipshape, it's easy to store your electric hedge trimmer away.
Batteries & charger are NOT included, available to purchase separately
A 5-year manufacturer's warranty is included with this model (T&C's apply).
For advice on the garden product best suited to your requirements please call our Technical Helpline on 0800 669 6326 or contact your local STIGA Dealer who will be happy to advise you.
Batteries & charger are NOT included, available to purchase separately
A 5-year manufacturer's warranty is included with this model (T&C's apply).
For advice on the garden product best suited to your requirements please call our Technical Helpline on 0800 669 6326 or contact your local STIGA Dealer who will be happy to advise you.
Faqs
Which type of vegetation can you work on with this battery hedge trimmer?
This hedge trimmer is an ideal tool for tackling medium-sized domestic bushes, including with those dense vegetation.
What should I do when it is not being used?
During the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the battery hedge trimmer in a safe place, ensuring you protect the blade when in the storage area.
Do the cutting blades need maintenance or sharpening?
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the hedge trimmer in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
Are the batteries included?
No, the battery and the charger are sold separately.
The suggested battery is a 48V ePower battery (2 Ah).
The suggested battery is a 48V ePower battery (2 Ah).
Technical Specifications
General info
EAN/UPC
8008984854949
SKU
278300008/ST3
Level
Experience
Power
Power source
Battery
Number of batteries needed - not included
1
Suggested battery capacity
2 Ah
ePower
Yes
Power
0.35 kW
Voltage
48 Volt
Battery kit
Not included
Motor type
With brushes
Maximum motor speed
21000 rpm
Lithium battery nominal energy
86.4 Wh
Working time (+/- 20%)
50 min
Cutting system
Cutting length
51 cm
Blade length
58 cm
Blade type
Dual action - Laser cut
Blade teeth speed
3500 spm
Teeth distance
27 mm
Cutting capacity (diameter)
18 mm
Equipment
Handle type
Turnable 180° - 3 positions
Vibe Control System (VCS)
No
Soft grip handle
Yes
Tools kit
Battery charger
Single standard
Battery charger output current
1.5 A
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
94
Measured sound power level dB(A)
91.4
Measured sound pressure level at operator ear dB(A)
80.4
Vibration level front handle (m/s2)
2.32
Vibration level rear handle (m/s2)
2.32
Overall dimensions
Pack weight
5.3 kg
Product weight without battery
3.5 kg
Weight
3.5 kg
Product length
1130 mm
Product width
230 mm
Product height
200 mm