Short Description |
Hedge trimmer powered by a next-generation 48 V battery with a 58 cm double-action blade and 180° rotating handle with 5 position settings. |
Series |
500 Series System |
EAN/UPC |
8008984811812 |
Unique selling point 03 |
The 58 cm laser-cut blade delivers double cutting action |
Unique selling point 01 |
Powered by a next-generation 48 V battery |
Unique selling point 02 |
180° adjustable handle with 5 positions |
Unique selling point 04 |
27 mm tooth spacing |
Unique selling point 05 |
Blade speed 3500 spm |
Unique selling point 06 |
2.0 Ah battery not included |
Key features 1 description |
All the switches are accessible and conveniently located on the handle, to allow the product to be used safely and easily. |
Key features 1 title |
Handy controls |
Key features 1 image |
/S/H/SHT500AE_278300008ST1_detail01.jpg |
Key features 2 title |
Double blade |
Key features 2 description |
The laser-cut 58 cm double blade allows an immediate and precise cut. The gap between the teeth measures 27 mm. |
Key features 2 image |
/S/H/SHT500AE_278300008ST1_detail06.jpg |
Key features 3 title |
Rotating handle |
Key features 3 description |
The ergonomic rear handle can be turned through 180° and can be set in five different positions to enable an easy shift from horizontal to vertical cutting. |
Key features 3 image |
/S/H/SHT500AE_278300008ST1_detail05.jpg |
Key features 4 title |
Supports |
Key features 4 description |
The supports located at the base of the product allow it to be rested on the ground in a stable position without any risk of damaging the machine. |
Key features 4 image |
/S/H/SHT500AE_278300008ST1_detail02.jpg |
Award 1 logo |
no_selection |
Award 2 logo |
no_selection |
Award 3 logo |
no_selection |
Certification CE logo |
no_selection |
Certification EAC logo |
no_selection |
FAQ 1 question |
Which type of vegetation can you work on with this machine? |
FAQ 1 answer |
The engine this machine is fitted with, along with the high capacity of the batteries available and the latest-generation blade, allow you to tackle dense and difficult bushes, including for longer periods of use. The distance between the teeth means even thicker branches can be cut through. |
FAQ 2 question |
What should I do when it is not being used? |
FAQ 2 answer |
During the times when it is not being used, we recommend you remove the battery from the machine, clean the teeth of the cutting element and place the machine in a safe place, ensuring you protect the blade when in the storage area. |
FAQ 3 question |
Do the cutting blades need maintenance or sharpening? |
FAQ 3 answer |
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point. |
FAQ 4 question |
The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do? |
FAQ 4 answer |
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available. |
Power source |
Lithium-ion battery |
Motor type |
With brushes |
Electric motor power |
420 W |
Maximum motor speed |
21000 rpm |
Voltage |
48 V |
Suggested battery capacity |
2 Ah |
Working time (+/- 20%) |
50 min |
Cutting length |
51 cm |
Blade length |
58 cm |
Blade type |
Dual action - Laser cut |
Blade teeth speed |
3500 spm |
Teeth distance |
27 mm |
Cutting capacity (diameter) |
18 mm |
Handle type |
Turnable 180° - 5 positions |
Vibe Control System (VCS) |
No |
Soft grip handle |
Yes |
Battery charger |
Not included |
Battery charger included |
No |
Measured sound pressure level at operator ear dB(A) |
80.4 |
Guaranteed sound power level (LwA) - dB(A) |
94 |
Measured sound power level dB(A) |
91.4 |
Pack weight |
4.6 kg |
Product weight |
3.500000 |
Product length |
1130 mm |
Product width |
230 mm |
Product height |
200 mm |
Product video - Title |
STIGA 500 Series System |
Product video - URL |
https://youtu.be/sZsKQXroFys |
How to video 1 - Title |
STIGA 500 Series System - Battery powered tools |
How to video 1 - URL |
https://youtu.be/F7hD0p9nu_g |
SKU |
278300008/ST1 |